From mboxrd@z Thu Jan 1 00:00:00 1970 From: Angelo Dureghello Date: Sun, 15 May 2016 23:03:52 +0200 Subject: [U-Boot] [PATCH 1/2] board: amcore: update to use dm serial driver Message-ID: <1463346232-20192-1-git-send-email-angelo@sysam.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Update amcore board to use dm serial driver. Signed-off-by: Angelo Dureghello --- board/sysam/amcore/amcore.c | 15 ++++++++++++++- configs/amcore_defconfig | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c index 42b7c23..b7217c5 100644 --- a/board/sysam/amcore/amcore.c +++ b/board/sysam/amcore/amcore.c @@ -1,7 +1,7 @@ /* * Board functions for Sysam AMCORE (MCF5307 based) board * - * (C) Copyright 2015 Angelo Dureghello + * (C) Copyright 2016 Angelo Dureghello * * SPDX-License-Identifier: GPL-2.0+ * @@ -11,6 +11,8 @@ #include #include #include +#include +#include void init_lcd(void) { @@ -99,3 +101,14 @@ phys_size_t initdram(int board_type) return get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); } + +static struct coldfire_serial_platdata mcf5307_serial_plat = { + .base = CONFIG_SYS_UART_BASE, + .port = 0, + .baudrate = CONFIG_BAUDRATE, +}; + +U_BOOT_DEVICE(coldfire_serial) = { + .name = "serial_coldfire", + .platdata = &mcf5307_serial_plat, +}; diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index f169fd3..860ac7d 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -2,6 +2,10 @@ CONFIG_M68K=y CONFIG_TARGET_AMCORE=y CONFIG_SYS_TEXT_BASE=0xffc00000 CONFIG_SYS_PROMPT="amcore $ " +CONFIG_DM=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x800 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set CONFIG_LOOPW=y -- 2.7.0.rc3