From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 03/13] imx-common: use simpler runtime cpu dection macros
Date: Wed, 18 May 2016 15:53:59 +0800 [thread overview]
Message-ID: <1463558049-26158-3-git-send-email-van.freenix@gmail.com> (raw)
In-Reply-To: <1463558049-26158-1-git-send-email-van.freenix@gmail.com>
Use simpler runtime cpu dection macros.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ulises Cardenas <Ulises.Cardenas@freescale.com>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: "Beno?t Th?baudeau" <benoit.thebaudeau.dev@gmail.com>
---
arch/arm/imx-common/hab.c | 43 +++++++++++++-----------------------------
arch/arm/imx-common/init.c | 5 ++---
arch/arm/imx-common/iomux-v3.c | 2 +-
arch/arm/imx-common/sata.c | 2 +-
arch/arm/imx-common/timer.c | 11 +++--------
5 files changed, 20 insertions(+), 43 deletions(-)
diff --git a/arch/arm/imx-common/hab.c b/arch/arm/imx-common/hab.c
index 8bbcc22..a980688 100644
--- a/arch/arm/imx-common/hab.c
+++ b/arch/arm/imx-common/hab.c
@@ -17,60 +17,45 @@
#define hab_rvt_report_event_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \
)
#define hab_rvt_report_status_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \
)
#define hab_rvt_authenticate_image_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \
)
#define hab_rvt_entry_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
((hab_rvt_entry_t *)HAB_RVT_ENTRY) \
)
#define hab_rvt_exit_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
((hab_rvt_exit_t *)HAB_RVT_EXIT) \
)
@@ -424,8 +409,7 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
*/
/* Check MMU enabled */
if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
- if (is_cpu_type(MXC_CPU_MX6Q) ||
- is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq()) {
/*
* This won't work on Rev 1.0.0 of
* i.MX6Q/D, since their ROM doesn't
@@ -434,10 +418,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
*/
if (!is_mx6dqp())
writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
- } else if (is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO)) {
+ } else if (is_mx6sdl()) {
writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
- } else if (is_cpu_type(MXC_CPU_MX6SL)) {
+ } else if (is_mx6sl()) {
writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
}
}
diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c
index 15dab1d..3d2ce3a 100644
--- a/arch/arm/imx-common/init.c
+++ b/arch/arm/imx-common/init.c
@@ -44,7 +44,7 @@ void init_aips(void)
writel(0x00000000, &aips2->opacr3);
writel(0x00000000, &aips2->opacr4);
- if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7)) {
+ if (is_mx6sx() || is_mx7()) {
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
@@ -78,8 +78,7 @@ void imx_set_wdog_powerdown(bool enable)
writew(enable, &wdog1->wmcr);
writew(enable, &wdog2->wmcr);
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
- is_soc_type(MXC_SOC_MX7))
+ if (is_mx6sx() || is_mx6ul() || is_mx7())
writew(enable, &wdog3->wmcr);
#ifdef CONFIG_MX7D
writew(enable, &wdog4->wmcr);
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 228d5f8..66137d1 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -83,7 +83,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
#if defined(CONFIG_MX6QDL)
stride = 2;
- if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ if (!is_mx6dq())
p += 1;
#else
stride = 1;
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
index d174a46..dd9698d 100644
--- a/arch/arm/imx-common/sata.c
+++ b/arch/arm/imx-common/sata.c
@@ -15,7 +15,7 @@ int setup_sata(void)
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
int ret;
- if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ if (!is_mx6dq())
return 1;
ret = enable_sata_clock();
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index 92c7218..bea17f2 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -43,10 +43,8 @@ DECLARE_GLOBAL_DATA_PTR;
static inline int gpt_has_clk_source_osc(void)
{
#if defined(CONFIG_MX6)
- if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) &&
- (soc_rev() > CHIP_REV_1_0)) || is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL))
+ if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
+ is_mx6sdl() || is_mx6sx() || is_mx6ul())
return 1;
return 0;
@@ -86,10 +84,7 @@ int timer_init(void)
i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
/* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */
- if (is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) ||
- is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sdl() || is_mx6sx() || is_mx6ul()) {
i |= GPTCR_24MEN;
/* Produce 3Mhz clock */
--
2.6.2
next prev parent reply other threads:[~2016-05-18 7:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-18 7:53 [U-Boot] [PATCH 01/13] imx-common: introduce simpler macros for runtime dection Peng Fan
2016-05-18 7:53 ` [U-Boot] [PATCH 02/13] imx: mx6: use simpler runtime cpu dection macros Peng Fan
2016-05-18 7:53 ` Peng Fan [this message]
2016-05-19 23:02 ` [U-Boot] [PATCH 03/13] imx-common: " Benoît Thébaudeau
2016-05-20 8:41 ` Peng Fan
2016-05-20 20:39 ` Benoît Thébaudeau
2016-05-18 7:54 ` [U-Boot] [PATCH 04/13] imx: mx6: ddr: support i.MX6D/QPlus Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 05/13] imx: mx6: correct get_cpu_speed_grade_hz for i.MX6DQP Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 06/13] imx-common: hab: support i.MX6DQPlus Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 07/13] imx-common: sata: return failure if not i.MX6DQPlus Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 08/13] imx-common: timer: support i.MX6DQPlus Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 09/13] mtd: nand: mxs: use simpler runtime cpu dection macros Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 10/13] ocotp: mxc: " Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 11/13] net: fec_mxc: " Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 12/13] block: dwc_ahsata: support i.MX6DQPlus Peng Fan
2016-05-18 7:54 ` [U-Boot] [PATCH 13/13] board: mx6sabresd/auto: use simpler runtime cpu dection macros Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463558049-26158-3-git-send-email-van.freenix@gmail.com \
--to=van.freenix@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox