From: Steve Rae <srae@broadcom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] usb: dwc2_udc_otg: support 8-bit interface
Date: Mon, 6 Jun 2016 08:57:36 -0700 [thread overview]
Message-ID: <1465228657-21027-1-git-send-email-srae@broadcom.com> (raw)
Define CONFIG_USB_GADGET_DWC2_PHY_8_BIT to allow the
physical interface to be 8-bit (rather than 16-bit).
Signed-off-by: Steve Rae <srae@broadcom.com>
---
drivers/usb/gadget/dwc2_udc_otg.c | 4 ++++
include/configs/bcm28155_ap.h | 1 +
2 files changed, 5 insertions(+)
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index cb20b00..a95c8d5 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -415,7 +415,11 @@ static void reconfig_usbd(struct dwc2_udc *dev)
|0<<7 /* Ulpi DDR sel*/
|0<<6 /* 0: high speed utmi+, 1: full speed serial*/
|0<<4 /* 0: utmi+, 1:ulpi*/
+#ifdef CONFIG_USB_GADGET_DWC2_PHY_8_BIT
+ |0<<3 /* phy i/f 0:8bit, 1:16bit*/
+#else
|1<<3 /* phy i/f 0:8bit, 1:16bit*/
+#endif
|0x7<<0; /* HS/FS Timeout**/
if (dev->pdata->usb_gusbcfg)
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 889e5db..e04cfbe 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -134,6 +134,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_USB_GADGET_DWC2_PHY_8_BIT
#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
#define CONFIG_USBID_ADDR 0x34052c46
--
1.8.5
next reply other threads:[~2016-06-06 15:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-06 15:57 Steve Rae [this message]
2016-06-06 15:59 ` [U-Boot] [PATCH] usb: dwc2_udc_otg: support 8-bit interface Marek Vasut
2016-06-06 16:15 ` Steve Rae
2016-06-06 16:30 ` Marek Vasut
2016-06-06 16:50 ` Steve Rae
2016-06-06 17:03 ` Marek Vasut
2016-06-06 18:58 ` Steve Rae
2016-06-06 19:10 ` Steve Rae
2016-06-06 21:05 ` Marek Vasut
2016-06-06 21:04 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465228657-21027-1-git-send-email-srae@broadcom.com \
--to=srae@broadcom.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox