From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <oss@buserror.net>
Date: Mon, 06 Jun 2016 12:56:48 -0500
Subject: [U-Boot] [PATCH 3/6] mtd: nand: Add the sunxi NAND controller
	driver
In-Reply-To: <20160606182223.1636b0df@bbrezillon>
References: <1465226478-22252-1-git-send-email-boris.brezillon@free-electrons.com>
 <1465226478-22252-4-git-send-email-boris.brezillon@free-electrons.com>
 <31991e89-53e0-0d9c-c643-241c6f8e8d51@redhat.com>
 <20160606182223.1636b0df@bbrezillon>
Message-ID: <1465235808.22191.86.camel@buserror.net>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, 2016-06-06 at 18:22 +0200, Boris Brezillon wrote:
> On Mon, 6 Jun 2016 17:36:10 +0200
> Hans de Goede <hdegoede@redhat.com> wrote:
> 
> > > +#ifndef CONFIG_SPL_BUILD
> > > +void sunxi_nand_init(void);
> > > +#endif
> > > +  
> > 
> > Can we have this in a header somewhere please, and without
> > the #ifdef around it, that is not necessary for prototypes.
> 
> Hehe, I was expecting this one :-). Do you know where I should put this
> prototype definition? A board.h file in board/sunxi/?

It's defined in drivers/mtd/nand and called from board/sunxi so the prototype
needs to go somewhere under include/.  It can go in include/configs/sunxi
-common.h with #ifndef __ASSEMBLY__ around it -- or as long as it's limited to
one init func per driver, maybe we could just put it in include/nand.h.

-Scott