[U-Boot] [PATCH 15/27] dm: mmc: sdhci: Refactor configuration setup to support DM

[Simon Glass <sjg@chromium.org>]

Move the configuration setting into a separate function which can be used by
the driver-model code.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 drivers/mmc/sdhci.c | 107 +++++++++++++++++++++++++++++-----------------------
 1 file changed, 59 insertions(+), 48 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 5c71ab8..6e786c8 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -9,6 +9,7 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <malloc.h>
 #include <mmc.h>
 #include <sdhci.h>
@@ -478,73 +479,83 @@ static const struct mmc_ops sdhci_ops = {
 	.init		= sdhci_init,
 };
 
-int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
+int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
+		    uint caps, u32 max_clk, u32 min_clk, uint version,
+		    uint quirks, uint host_caps)
 {
-	unsigned int caps;
-
-	host->cfg.name = host->name;
-	host->cfg.ops = &sdhci_ops;
-
-	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-#ifdef CONFIG_MMC_SDMA
-	if (!(caps & SDHCI_CAN_DO_SDMA)) {
-		printf("%s: Your controller doesn't support SDMA!!\n",
-		       __func__);
-		return -1;
-	}
+	cfg->name = name;
+#ifndef CONFIG_DM_MMC_OPS
+	cfg->ops = &sdhci_ops;
 #endif
-
 	if (max_clk)
-		host->cfg.f_max = max_clk;
+		cfg->f_max = max_clk;
 	else {
-		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
-			host->cfg.f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
-				>> SDHCI_CLOCK_BASE_SHIFT;
+		if (version >= SDHCI_SPEC_300)
+			cfg->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK) >>
+				SDHCI_CLOCK_BASE_SHIFT;
 		else
-			host->cfg.f_max = (caps & SDHCI_CLOCK_BASE_MASK)
-				>> SDHCI_CLOCK_BASE_SHIFT;
-		host->cfg.f_max *= 1000000;
-	}
-	if (host->cfg.f_max == 0) {
-		printf("%s: Hardware doesn't specify base clock frequency\n",
-		       __func__);
-		return -1;
+			cfg->f_max = (caps & SDHCI_CLOCK_BASE_MASK) >>
+				SDHCI_CLOCK_BASE_SHIFT;
+		cfg->f_max *= 1000000;
 	}
+	if (cfg->f_max == 0)
+		return -EINVAL;
 	if (min_clk)
-		host->cfg.f_min = min_clk;
+		cfg->f_min = min_clk;
 	else {
-		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
-			host->cfg.f_min = host->cfg.f_max /
-				SDHCI_MAX_DIV_SPEC_300;
+		if (version >= SDHCI_SPEC_300)
+			cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_300;
 		else
-			host->cfg.f_min = host->cfg.f_max /
-				SDHCI_MAX_DIV_SPEC_200;
+			cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_200;
 	}
-
-	host->cfg.voltages = 0;
+	cfg->voltages = 0;
 	if (caps & SDHCI_CAN_VDD_330)
-		host->cfg.voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+		cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
 	if (caps & SDHCI_CAN_VDD_300)
-		host->cfg.voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+		cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
 	if (caps & SDHCI_CAN_VDD_180)
-		host->cfg.voltages |= MMC_VDD_165_195;
+		cfg->voltages |= MMC_VDD_165_195;
 
-	if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
-		host->cfg.voltages |= host->voltages;
-
-	host->cfg.host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
-	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+	cfg->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+	if (version >= SDHCI_SPEC_300) {
 		if (caps & SDHCI_CAN_DO_8BIT)
-			host->cfg.host_caps |= MMC_MODE_8BIT;
+			cfg->host_caps |= MMC_MODE_8BIT;
 	}
 
-	if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
-		host->cfg.host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
+	if (quirks & SDHCI_QUIRK_NO_HISPD_BIT)
+		cfg->host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
+
+	if (host_caps)
+		cfg->host_caps |= host_caps;
 
-	if (host->host_caps)
-		host->cfg.host_caps |= host->host_caps;
+	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 
-	host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+	return 0;
+}
+
+int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
+{
+	unsigned int caps;
+
+	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+#ifdef CONFIG_MMC_SDMA
+	if (!(caps & SDHCI_CAN_DO_SDMA)) {
+		printf("%s: Your controller doesn't support SDMA!!\n",
+		       __func__);
+		return -1;
+	}
+#endif
+
+	if (sdhci_setup_cfg(&host->cfg, host->name, host->bus_width, caps,
+			    max_clk, min_clk, SDHCI_GET_VERSION(host),
+			    host->quirks, host->host_caps)) {
+		printf("%s: Hardware doesn't specify base clock frequency\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
+		host->cfg.voltages |= host->voltages;
 
 	sdhci_reset(host, SDHCI_RESET_ALL);
 
-- 
2.8.0.rc3.226.g39d4020