From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 17/27] dm: mmc: msm_sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS
Date: Sun, 12 Jun 2016 23:30:29 -0600 [thread overview]
Message-ID: <1465795839-16632-18-git-send-email-sjg@chromium.org> (raw)
In-Reply-To: <1465795839-16632-1-git-send-email-sjg@chromium.org>
Add support for using driver model for block devices and MMC operations in
this driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
drivers/mmc/msm_sdhci.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 49 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index 1e2a29b..150adf0 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -36,6 +36,11 @@
/* Non standard (?) SDHCI register */
#define SDHCI_VENDOR_SPEC_CAPABILITIES0 0x11c
+struct msm_sdhc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
struct msm_sdhc {
struct sdhci_host host;
void *base;
@@ -74,9 +79,14 @@ static int msm_sdc_clk_init(struct udevice *dev)
static int msm_sdc_probe(struct udevice *dev)
{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+#ifdef CONFIG_BLK
+ struct msm_sdhc_plat *plat = dev_get_platdata(dev);
+#endif
struct msm_sdhc *prv = dev_get_priv(dev);
struct sdhci_host *host = &prv->host;
u32 core_version, core_minor, core_major;
+ u32 caps;
int ret;
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B;
@@ -120,7 +130,7 @@ static int msm_sdc_probe(struct udevice *dev)
* controller versions and must be explicitly enabled.
*/
if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) {
- u32 caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
+ caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT;
writel(caps, host->ioaddr + SDHCI_VENDOR_SPEC_CAPABILITIES0);
}
@@ -128,8 +138,26 @@ static int msm_sdc_probe(struct udevice *dev)
/* Set host controller version */
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+#ifdef CONFIG_BLK
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
+ caps, 0, 0, host->version, host->quirks, 0);
+ host->mmc = &plat->mmc;
+#else
/* automatically detect max and min speed */
- return add_sdhci(host, 0, 0);
+ ret = add_sdhci(host, 0, 0);
+#endif
+ if (ret)
+ return ret;
+ host->mmc->priv = &prv->host;
+ host->mmc->dev = dev;
+ upriv->mmc = host->mmc;
+
+#ifdef CONFIG_DM_MMC_OPS
+ return sdhci_probe(dev);
+#else
+ return 0;
+#endif
}
static int msm_sdc_remove(struct udevice *dev)
@@ -164,6 +192,20 @@ static int msm_ofdata_to_platdata(struct udevice *dev)
return 0;
}
+static int msm_sdc_bind(struct udevice *dev)
+{
+#ifdef CONFIG_BLK
+ struct msm_sdhc_plat *plat = dev_get_platdata(dev);
+ int ret;
+
+ ret = sdhci_bind(dev, &plat->mmc, &plat->cfg);
+ if (ret)
+ return ret;
+#endif
+
+ return 0;
+}
+
static const struct udevice_id msm_mmc_ids[] = {
{ .compatible = "qcom,sdhci-msm-v4" },
{ }
@@ -174,7 +216,12 @@ U_BOOT_DRIVER(msm_sdc_drv) = {
.id = UCLASS_MMC,
.of_match = msm_mmc_ids,
.ofdata_to_platdata = msm_ofdata_to_platdata,
+#ifdef CONFIG_DM_MMC_OPS
+ .ops = &sdhci_ops,
+#endif
+ .bind = msm_sdc_bind,
.probe = msm_sdc_probe,
.remove = msm_sdc_remove,
.priv_auto_alloc_size = sizeof(struct msm_sdhc),
+ .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
};
--
2.8.0.rc3.226.g39d4020
next prev parent reply other threads:[~2016-06-13 5:30 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 5:30 [U-Boot] [PATCH 00/27] dm: mmc: Add driver-model support for MMC operations Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 01/27] dm: mmc: dwmmc: Add comments to the dwmmc setup functions Simon Glass
2016-06-27 10:54 ` Jaehoon Chung
2016-07-03 22:28 ` Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 02/27] rockchip: Use 'select' instead of defaults in Kconfig Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 03/27] mmc: Add function declarations for mmc_bread() and mmc_switch_part() Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 04/27] dm: mmc: Move CONFIG_BLK code into the mmc uclass Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 05/27] dm: mmc: Move non-CONFIG_BLK code into mmc_legacy.c Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 06/27] mmc: Move MMC boot code into its own file Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 07/27] dm: mmc: rockchip: Support only CONFIG_BLK Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 08/27] mmc: Move tracing code into separate functions Simon Glass
2016-07-03 23:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 09/27] rockchip: Disable CONFIG_SDHCI Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 10/27] dm: mmc: Add a way to use driver model for MMC operations Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 11/27] dm: mmc: dwmmc: Support CONFIG_DM_MMC_OPS Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 12/27] dm: mmc: rockchip: Enable CONFIG_DM_MMC_OPS for all boards Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 13/27] rockchip: Add MAINTAINER files for kylin_rk3036, evb_rk3036 Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 14/27] dm: sandbox: Convert to use CONFIG_CMD_MMC_OPS Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 15/27] dm: mmc: sdhci: Refactor configuration setup to support DM Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 16/27] dm: mmc: sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` Simon Glass [this message]
2016-07-03 23:25 ` [U-Boot] [PATCH 17/27] dm: mmc: msm_sdhci: " Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 18/27] dm: mmc: Move dragonboard410c to use " Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 19/27] dm: mmc: msmsdhic: Drop old MMC code Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 20/27] dm: spl: mmc: Support CONFIG_BLK in SPL MMC Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 21/27] dm: dfu: mmc: Support CONFIG_BLK in DFU for MMC Simon Glass
2016-07-03 23:25 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 22/27] net: phy: marvell: Add a missing errno.h header Simon Glass
2016-06-13 18:21 ` Joe Hershberger
2016-06-14 5:55 ` Michal Simek
2016-07-05 22:24 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 23/27] zynq: Increase the early malloc() size Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 24/27] dm: zynq: usb: Convert to CONFIG_DM_USB Simon Glass
2016-06-13 10:48 ` Michal Simek
2016-06-28 6:08 ` Siva Durga Prasad Paladugu
2016-07-04 4:49 ` Siva Durga Prasad Paladugu
2016-08-01 1:00 ` Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 25/27] dm: mmc: zynq: Convert zynq to use driver model for MMC Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 26/27] dm: mmc: Enable DM_MMC_OPS by default with DM_MMC Simon Glass
2016-06-13 5:30 ` [U-Boot] [PATCH 27/27] dm: blk: Enable CONFIG_BLK if DM_MMC is enabled Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465795839-16632-18-git-send-email-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox