From: Andreas Dannenberg <dannenberg@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/9] arm: omap-common: add secure smc entry
Date: Mon, 20 Jun 2016 22:34:06 -0500 [thread overview]
Message-ID: <1466480052-25004-4-git-send-email-dannenberg@ti.com> (raw)
In-Reply-To: <1466480052-25004-1-git-send-email-dannenberg@ti.com>
From: Daniel Allred <d-allred@ti.com>
Add an interface for calling secure ROM APIs across a range of OMAP and
OMAP compatible high-security (HS) device variants. While at it, also
perform minor cleanup/alignment without any change in functionality.
Signed-off-by: Daniel Allred <d-allred@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 45 ++++++++++++++++++++------
arch/arm/include/asm/omap_common.h | 6 ++++
2 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 5283135..66a3b3d 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -16,9 +16,10 @@
#include <asm/arch/spl.h>
#include <linux/linkage.h>
+.arch_extension sec
+
#ifdef CONFIG_SPL
ENTRY(save_boot_params)
-
ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
str r0, [r1]
b save_boot_params_ret
@@ -26,14 +27,40 @@ ENDPROC(save_boot_params)
#endif
ENTRY(omap_smc1)
- PUSH {r4-r12, lr} @ save registers - ROM code may pollute
+ push {r4-r12, lr} @ save registers - ROM code may pollute
@ our registers
- MOV r12, r0 @ Service
- MOV r0, r1 @ Argument
- DSB
- DMB
- .word 0xe1600070 @ SMC #0 - hand assembled for GCC versions
- @ call ROM Code API for the service requested
+ mov r12, r0 @ Service
+ mov r0, r1 @ Argument
- POP {r4-r12, pc}
+ dsb
+ dmb
+ smc 0 @ SMC #0 to enter monitor mode
+ @ call ROM Code API for the service requested
+ pop {r4-r12, pc}
ENDPROC(omap_smc1)
+
+ENTRY(omap_smc_sec)
+ push {r4-r12, lr} @ save registers - ROM code may pollute
+ @ our registers
+ mov r6, #0xFF @ Indicate new Task call
+ mov r12, #0x00 @ Secure Service ID in R12
+
+ dsb
+ dmb
+ smc 0 @ SMC #0 to enter monitor mode
+
+ b omap_smc_sec_end @ exit at end of the service execution
+ nop
+
+ @ In case of IRQ happening in Secure, then ARM will branch here.
+ @ At that moment, IRQ will be pending and ARM will jump to Non Secure
+ @ IRQ handler
+ mov r12, #0xFE
+
+ dsb
+ dmb
+ smc 0 @ SMC #0 to enter monitor mode
+
+omap_smc_sec_end:
+ pop {r4-r12, pc}
+ENDPROC(omap_smc_sec)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 07f3848..605c549 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -627,6 +627,12 @@ void recalibrate_iodelay(void);
void omap_smc1(u32 service, u32 val);
+/*
+ * Low-level helper function used when performing secure ROM calls on high-
+ * security (HS) device variants by doing a specially-formed smc entry.
+ */
+u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
+
void enable_edma3_clocks(void);
void disable_edma3_clocks(void);
--
2.6.4
next prev parent reply other threads:[~2016-06-21 3:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 3:34 [U-Boot] [PATCH 0/9] Secure Boot by Authenticating/Decrypting SPL FIT blobs Andreas Dannenberg
2016-06-21 3:34 ` [U-Boot] [PATCH 1/9] arm: cache: add missing dummy functions for when dcache disabled Andreas Dannenberg
2016-06-21 3:34 ` [U-Boot] [PATCH 2/9] spl: fit: add support for post-processing of images Andreas Dannenberg
2016-06-21 23:57 ` Tom Rini
2016-06-23 2:38 ` Masahiro Yamada
2016-06-23 13:25 ` Andreas Dannenberg
2016-06-23 13:57 ` Simon Glass
2016-06-23 14:19 ` Andreas Dannenberg
2016-06-23 14:45 ` Simon Glass
2016-06-23 15:00 ` Andreas Dannenberg
2016-06-21 3:34 ` Andreas Dannenberg [this message]
2016-06-21 23:57 ` [U-Boot] [PATCH 3/9] arm: omap-common: add secure smc entry Tom Rini
2016-06-21 3:34 ` [U-Boot] [PATCH 4/9] arm: omap-common: add secure rom call API for secure devices Andreas Dannenberg
2016-06-21 23:56 ` Tom Rini
2016-06-21 3:34 ` [U-Boot] [PATCH 5/9] arm: omap-common: secure ROM signature verify API Andreas Dannenberg
2016-06-21 4:31 ` Lokesh Vutla
2016-06-21 5:02 ` Andreas Dannenberg
2016-06-21 5:16 ` Lokesh Vutla
2016-06-21 23:56 ` Tom Rini
2016-06-22 9:43 ` Lokesh Vutla
2016-06-22 14:21 ` Andreas Dannenberg
2016-06-22 14:36 ` Tom Rini
2016-06-22 14:49 ` Andreas Dannenberg
2016-06-21 3:34 ` [U-Boot] [PATCH 6/9] arm: omap-common: Update to generate secure U-Boot FIT blob Andreas Dannenberg
2016-06-21 3:34 ` [U-Boot] [PATCH 7/9] arm: omap5: add U-Boot FIT signing and SPL image post-processing Andreas Dannenberg
2016-06-21 23:57 ` Tom Rini
2016-06-21 3:34 ` [U-Boot] [PATCH 8/9] arm: am4x: " Andreas Dannenberg
2016-06-21 23:57 ` Tom Rini
2016-06-21 3:34 ` [U-Boot] [PATCH 9/9] doc: Update info on using secure devices from TI Andreas Dannenberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466480052-25004-4-git-send-email-dannenberg@ti.com \
--to=dannenberg@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox