From: Max Filippov <jcmvbkbc@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/7] net/ethoc: add Kconfig entry for the driver
Date: Tue, 2 Aug 2016 14:31:04 +0300 [thread overview]
Message-ID: <1470137470-6051-2-git-send-email-jcmvbkbc@gmail.com> (raw)
In-Reply-To: <1470137470-6051-1-git-send-email-jcmvbkbc@gmail.com>
Add Kconfig entry for the driver, remove #define CONFIG_ETHOC from the
only board configuration that uses it and put it into that board's
defconfig.
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
---
configs/openrisc-generic_defconfig | 2 ++
drivers/net/Kconfig | 5 +++++
include/configs/openrisc-generic.h | 1 -
3 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/configs/openrisc-generic_defconfig b/configs/openrisc-generic_defconfig
index 14923c0..5bc81cc 100644
--- a/configs/openrisc-generic_defconfig
+++ b/configs/openrisc-generic_defconfig
@@ -6,5 +6,7 @@ CONFIG_TARGET_OPENRISC_GENERIC=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
CONFIG_SYS_NS16550=y
# CONFIG_AUTOBOOT is not set
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 88d8e83..be3ed73 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -124,6 +124,11 @@ config ETH_DESIGNWARE
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
provide the PHY (physical media interface).
+config ETHOC
+ bool "OpenCores 10/100 Mbps Ethernet MAC"
+ help
+ This MAC is present in OpenRISC and Xtensa XTFPGA boards.
+
config MVPP2
bool "Marvell Armada 375 network interface support"
depends on ARMADA_375
diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h
index 913256a..227c0ca 100644
--- a/include/configs/openrisc-generic.h
+++ b/include/configs/openrisc-generic.h
@@ -44,7 +44,6 @@
/*
* Ethernet
*/
-#define CONFIG_ETHOC
#define CONFIG_SYS_ETHOC_BASE 0x92000000
#define CONFIG_BOOTFILE "boot.img"
--
2.1.4
next prev parent reply other threads:[~2016-08-02 11:31 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-02 11:31 [U-Boot] [PATCH 0/7] net/ethoc improvements Max Filippov
2016-08-02 11:31 ` Max Filippov [this message]
2016-08-04 17:11 ` [U-Boot] [PATCH 1/7] net/ethoc: add Kconfig entry for the driver Joe Hershberger
2016-08-02 11:31 ` [U-Boot] [PATCH 2/7] net/ethoc: use priv instead of dev internally Max Filippov
2016-08-04 17:16 ` Joe Hershberger
2016-08-02 11:31 ` [U-Boot] [PATCH 3/7] net/ethoc: add CONFIG_DM_ETH support Max Filippov
2016-08-04 1:16 ` Simon Glass
2016-08-04 17:51 ` Joe Hershberger
2016-08-05 14:06 ` Max Filippov
2016-08-02 11:31 ` [U-Boot] [PATCH 4/7] net/ethoc: support device tree Max Filippov
2016-08-04 18:01 ` Joe Hershberger
2016-08-02 11:31 ` [U-Boot] [PATCH 5/7] net/ethoc: don't mix virtual and physical addresses Max Filippov
2016-08-04 18:08 ` Joe Hershberger
2016-08-02 11:31 ` [U-Boot] [PATCH 6/7] net/ethoc: support private memory configurations Max Filippov
2016-08-04 19:43 ` Joe Hershberger
2016-08-02 11:31 ` [U-Boot] [PATCH 7/7] net/ethoc: implement MDIO bus and support phylib Max Filippov
2016-08-04 20:48 ` Joe Hershberger
2016-08-05 14:36 ` Max Filippov
2016-08-04 17:10 ` [U-Boot] [PATCH 0/7] net/ethoc improvements Joe Hershberger
2016-08-04 17:26 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470137470-6051-2-git-send-email-jcmvbkbc@gmail.com \
--to=jcmvbkbc@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox