[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model

[Marcel Ziswiler <marcel.ziswiler@toradex.com>]

On Wed, 2016-08-03 at 15:51 +0200, Marek Vasut wrote:
> On 08/03/2016 11:46 AM, Alban Bedel wrote:
> > 
> > On Wed, 3 Aug 2016 09:00:42 +0200
> > Marek Vasut <marex@denx.de> wrote:
> > 
> > > 
> > > On 08/03/2016 07:32 AM, Alban Bedel wrote:
> > > > 
> > > > Commit 147271209a9d ("net: asix: fix operation without eeprom")
> > > > added a special handling for ASIX 88772B that enable another
> > > > type of header. This break the driver in DM mode as the extra
> > > > handling
> > > > needed in the receive path is missing.
> > > So add the extra handling ?
> > I can do that too, but I though u-boot preferred to avoid useless
> > code.
> Yes, if it is useless.
> 
> > 
> > > 
> > > > 
> > > > However this new header mode is not required and only seems to
> > > > increase the code complexity, so this patch revert this part of
> > > > commit 147271209a9d.
> > > Why is it not required ?
> > It works fine without, since 2012. In fact this change is not even
> > mentioned in the log of commit 147271209a9d, so I really don't know
> > why
> > it was added in the first place. As can be seen in the revert all
> > it
> > does is adding 2 bytes to the USB packets that are then just
> > skipped.
> > Seems pretty useless to me.
> I would like to get some feedback on this from Marcel, since he added
> this stuff.

Yes, sorry. I just came back from vacation and started looking into it
now. As far as I remember on our hardware without this Ethernet did not
quite work reliably. This also means that with driver model so far it
does not work for us which I fed back to Simon once but so far this has
not been resolved. That fix came from some early U-Boot work done by
Antmicro way back and I am missing some of the history.

Cheers

Marcel

> > Alban