From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Thu, 11 Aug 2016 14:02:44 +0800 Subject: [U-Boot] [PATCH 08/21] imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ In-Reply-To: <1470895377-2502-1-git-send-email-peng.fan@nxp.com> References: <1470895377-2502-1-git-send-email-peng.fan@nxp.com> Message-ID: <1470895377-2502-9-git-send-email-peng.fan@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Since MX6ULL select MX6UL, we can not use IS_ENABLED(CONFIG_MX6UL) here, because this piece code is only for i.MX6UL. Signed-off-by: Peng Fan Cc: Stefano Babic --- arch/arm/cpu/armv7/mx6/soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index af7fca5..4083ba5 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -356,7 +356,7 @@ int arch_cpu_init(void) set_ahb_rate(132000000); } - if (IS_ENABLED(CONFIG_MX6UL) && is_soc_rev(CHIP_REV_1_0) == 0) { + if (is_mx6ul() && is_soc_rev(CHIP_REV_1_0) == 0) { /* * According to the design team's requirement on i.MX6UL, * the PMIC_STBY_REQ PAD should be configured as open -- 2.6.2