From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 01/27] sf: Simplify fastest read cmd code
Date: Thu, 11 Aug 2016 13:37:23 +0530 [thread overview]
Message-ID: <1470902869-22570-1-git-send-email-jteki@openedev.com> (raw)
Fastest read command code look for fastest read command
taking inputs from spi->mode_rx and flags from param table
and controller mode_rx is always been a priority.
Since mode_rx is always set from controller side this optimized
code doesn't require much and this code required exctra overhead like
1) Maintain e_rx_cmd in param table
2) Maintain mode_rx in spi_slave {}
Hence removed this code, and look for read command from normal
spi->mode from spi_slave{} and params->flags
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/mtd/spi/sf_internal.h | 4 ++++
drivers/mtd/spi/spi_flash.c | 28 ++++++++++------------------
2 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index da2bb7b..c5cb791 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -46,6 +46,10 @@ enum {
E_FSR = BIT(2),
SST_WR = BIT(3),
WR_QPP = BIT(4),
+ RD_QUAD = BIT(5),
+ RD_DUAL = BIT(6),
+ RD_QUADIO = BIT(7),
+ RD_DUALIO = BIT(8),
};
enum spi_nor_option_flags {
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 64d4e0f..5fd408c 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -1013,15 +1013,8 @@ int spi_flash_scan(struct spi_flash *flash)
struct spi_slave *spi = flash->spi;
const struct spi_flash_params *params;
u16 jedec, ext_jedec;
- u8 cmd, idcode[5];
+ u8 idcode[5];
int ret;
- static u8 spi_read_cmds_array[] = {
- CMD_READ_ARRAY_SLOW,
- CMD_READ_ARRAY_FAST,
- CMD_READ_DUAL_OUTPUT_FAST,
- CMD_READ_QUAD_OUTPUT_FAST,
- CMD_READ_DUAL_IO_FAST,
- CMD_READ_QUAD_IO_FAST };
/* Read the ID codes */
ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
@@ -1177,17 +1170,16 @@ int spi_flash_scan(struct spi_flash *flash)
/* Now erase size becomes valid sector size */
flash->sector_size = flash->erase_size;
- /* Look for the fastest read cmd */
- cmd = fls(params->e_rd_cmd & spi->mode_rx);
- if (cmd) {
- cmd = spi_read_cmds_array[cmd - 1];
- flash->read_cmd = cmd;
- } else {
- /* Go for default supported read cmd */
- flash->read_cmd = CMD_READ_ARRAY_FAST;
- }
+ /* Look for read commands */
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ if (spi->mode_rx & SPI_RX_SLOW)
+ flash->read_cmd = CMD_READ_ARRAY_SLOW;
+ else if (spi->mode_rx & SPI_RX_QUAD && params->flags & RD_QUAD)
+ flash->read_cmd = CMD_READ_QUAD_OUTPUT_FAST;
+ else if (spi->mode_rx & SPI_RX_DUAL && params->flags & RD_DUAL)
+ flash->read_cmd = CMD_READ_DUAL_OUTPUT_FAST;
- /* Not require to look for fastest only two write cmds yet */
+ /* Look for write commands */
if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
else
--
2.7.4
next reply other threads:[~2016-08-11 8:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 8:07 Jagan Teki [this message]
2016-08-11 8:07 ` [U-Boot] [PATCH v3 02/27] sf: Remove e_rd_cmd from param table Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 03/27] spi: Use mode for rx mode flags Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 04/27] spi: Remove SPI_RX_FAST Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 05/27] sf: Remove SECT_32K Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 06/27] sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 07/27] sf: Move flags macro's to spi_flash_params{} members Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 08/27] sf: Adopt flash table INFO macro from Linux Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 09/27] sf: Add JEDEC_ID and JEDEC_EXT macro Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 10/27] sf: Rename spi_flash_params => spi_flash_info Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 11/27] sf: Add JEDEC_MFR Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 12/27] sf: Simplify lock ops detection code Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 13/27] sf: sandbox: Fix ID exctract from spi_flash_info Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 14/27] sf: Cleanup spi_flash_info{} Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 15/27] sf: Cleanup sf_params Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 16/27] sf: nr_sectors -> n_sectors Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 17/27] sf: Add SPI_FLASH_MAX_ID_LEN Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 18/27] sf: Increase max id length by 1 byte Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 19/27] sf: Add INFO6 flash_info macro Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 20/27] sf: params: Add S25FS256S_64K spi flash support Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 21/27] sf: Remove legacy idcode detection code Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 22/27] sf: Remove non-meaningful comments Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 23/27] sf: Rename sf_params.c to spi_flash_ids Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 24/27] sf: ids: Use small letter's with flash name Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 25/27] sf: ids: Use small letter in ext_jedec Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 26/27] sf: Rename few local functions Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 27/27] spi: Remove dual flash code Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470902869-22570-1-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox