From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 26/27] sf: Rename few local functions
Date: Thu, 11 Aug 2016 13:37:48 +0530 [thread overview]
Message-ID: <1470902869-22570-26-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1470902869-22570-1-git-send-email-jteki@openedev.com>
spi_flash_write_bar-> write_bar
spi_flash_write_bar -> read_bar
spi_flash_cmd_wait_ready -> spi_flash_wait_till_ready
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/mtd/spi/sf_internal.h | 2 +-
drivers/mtd/spi/spi_flash.c | 23 +++++++++++------------
2 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index d50fb9a..2feb3b8 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -184,7 +184,7 @@ static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
* - SPI claim
* - spi_flash_cmd_write_enable
* - spi_flash_cmd_write
- * - spi_flash_cmd_wait_ready
+ * - spi_flash_wait_till_ready
* - SPI release
*/
int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index c1025c9..b4001a5 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -144,7 +144,7 @@ static int write_evcr(struct spi_flash *flash, u8 evcr)
#endif
#ifdef CONFIG_SPI_FLASH_BAR
-static int spi_flash_write_bar(struct spi_flash *flash, u32 offset)
+static int write_bar(struct spi_flash *flash, u32 offset)
{
u8 cmd, bank_sel;
int ret;
@@ -165,8 +165,7 @@ bar_end:
return flash->bank_curr;
}
-static int spi_flash_read_bar(struct spi_flash *flash,
- const struct spi_flash_info *info)
+static int read_bar(struct spi_flash *flash, const struct spi_flash_info *info)
{
u8 curr_bank = 0;
int ret;
@@ -263,8 +262,8 @@ static int spi_flash_ready(struct spi_flash *flash)
return sr && fsr;
}
-static int spi_flash_cmd_wait_ready(struct spi_flash *flash,
- unsigned long timeout)
+static int spi_flash_wait_till_ready(struct spi_flash *flash,
+ unsigned long timeout)
{
unsigned long timebase;
int ret;
@@ -312,7 +311,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
return ret;
}
- ret = spi_flash_cmd_wait_ready(flash, timeout);
+ ret = spi_flash_wait_till_ready(flash, timeout);
if (ret < 0) {
debug("SF: write %s timed out\n",
timeout == SPI_FLASH_PROG_TIMEOUT ?
@@ -354,7 +353,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
spi_flash_dual(flash, &erase_addr);
#endif
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bar(flash, erase_addr);
+ ret = write_bar(flash, erase_addr);
if (ret < 0)
return ret;
#endif
@@ -405,7 +404,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
spi_flash_dual(flash, &write_addr);
#endif
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bar(flash, write_addr);
+ ret = write_bar(flash, write_addr);
if (ret < 0)
return ret;
#endif
@@ -509,7 +508,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
spi_flash_dual(flash, &read_addr);
#endif
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bar(flash, read_addr);
+ ret = write_bar(flash, read_addr);
if (ret < 0)
return ret;
bank_sel = flash->bank_curr;
@@ -561,7 +560,7 @@ static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
if (ret)
return ret;
- return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+ return spi_flash_wait_till_ready(flash, SPI_FLASH_PROG_TIMEOUT);
}
int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
@@ -609,7 +608,7 @@ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
break;
}
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+ ret = spi_flash_wait_till_ready(flash, SPI_FLASH_PROG_TIMEOUT);
if (ret)
break;
@@ -1137,7 +1136,7 @@ int spi_flash_scan(struct spi_flash *flash)
/* Configure the BAR - discover bank cmds and read current bank */
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_read_bar(flash, info);
+ ret = read_bar(flash, info);
if (ret < 0)
return ret;
#endif
--
2.7.4
next prev parent reply other threads:[~2016-08-11 8:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 8:07 [U-Boot] [PATCH v3 01/27] sf: Simplify fastest read cmd code Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 02/27] sf: Remove e_rd_cmd from param table Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 03/27] spi: Use mode for rx mode flags Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 04/27] spi: Remove SPI_RX_FAST Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 05/27] sf: Remove SECT_32K Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 06/27] sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 07/27] sf: Move flags macro's to spi_flash_params{} members Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 08/27] sf: Adopt flash table INFO macro from Linux Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 09/27] sf: Add JEDEC_ID and JEDEC_EXT macro Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 10/27] sf: Rename spi_flash_params => spi_flash_info Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 11/27] sf: Add JEDEC_MFR Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 12/27] sf: Simplify lock ops detection code Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 13/27] sf: sandbox: Fix ID exctract from spi_flash_info Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 14/27] sf: Cleanup spi_flash_info{} Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 15/27] sf: Cleanup sf_params Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 16/27] sf: nr_sectors -> n_sectors Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 17/27] sf: Add SPI_FLASH_MAX_ID_LEN Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 18/27] sf: Increase max id length by 1 byte Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 19/27] sf: Add INFO6 flash_info macro Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 20/27] sf: params: Add S25FS256S_64K spi flash support Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 21/27] sf: Remove legacy idcode detection code Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 22/27] sf: Remove non-meaningful comments Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 23/27] sf: Rename sf_params.c to spi_flash_ids Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 24/27] sf: ids: Use small letter's with flash name Jagan Teki
2016-08-11 8:07 ` [U-Boot] [PATCH v3 25/27] sf: ids: Use small letter in ext_jedec Jagan Teki
2016-08-11 8:07 ` Jagan Teki [this message]
2016-08-11 8:07 ` [U-Boot] [PATCH v3 27/27] spi: Remove dual flash code Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470902869-22570-26-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox