From: Chin Liang See <clsee@altera.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/11] arm: socfpga: mmu: Add memory map layout for Stratix 10 SoC
Date: Mon, 22 Aug 2016 23:02:40 +0800 [thread overview]
Message-ID: <1471878163-3598-9-git-send-email-clsee@altera.com> (raw)
In-Reply-To: <1471878163-3598-1-git-send-email-clsee@altera.com>
Add memory map layout for Stratix 10 SoC
Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
---
arch/arm/mach-socfpga/Makefile | 2 ++
arch/arm/mach-socfpga/mmu-arm64.c | 71 +++++++++++++++++++++++++++++++++++++++
2 files changed, 73 insertions(+)
create mode 100755 arch/arm/mach-socfpga/mmu-arm64.c
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 809cd47..af1cc01 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -12,6 +12,8 @@ obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += mmu-arm64.o
+
# QTS-generated config file wrappers
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o
obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
diff --git a/arch/arm/mach-socfpga/mmu-arm64.c b/arch/arm/mach-socfpga/mmu-arm64.c
new file mode 100755
index 0000000..3b73143
--- /dev/null
+++ b/arch/arm/mach-socfpga/mmu-arm64.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct mm_region socfpga_stratix10_mem_map[] = {
+ {
+ /* MEM 2GB*/
+ .virt = 0x0UL,
+ .phys = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE,
+ }, {
+ /* FPGA 1.5GB */
+ .virt = 0x80000000UL,
+ .phys = 0x80000000UL,
+ .size = 0x60000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+ }, {
+ /* DEVICE 142MB */
+ .virt = 0xF7000000UL,
+ .phys = 0xF7000000UL,
+ .size = 0x08E00000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+ }, {
+ /* OCRAM 1MB but available 256KB */
+ .virt = 0xFFE00000UL,
+ .phys = 0xFFE00000UL,
+ .size = 0x00100000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE,
+ }, {
+ /* DEVICE 32KB */
+ .virt = 0xFFFC0000UL,
+ .phys = 0xFFFC0000UL,
+ .size = 0x00008000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+ }, {
+ /* MEM 124GB */
+ .virt = 0x0100000000UL,
+ .phys = 0x0100000000UL,
+ .size = 0x1F00000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE,
+ }, {
+ /* DEVICE 4GB */
+ .virt = 0x2000000000UL,
+ .phys = 0x2000000000UL,
+ .size = 0x0100000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN,
+ }, {
+ /* List terminator */
+ },
+};
+
+struct mm_region *mem_map = socfpga_stratix10_mem_map;
--
2.2.2
next prev parent reply other threads:[~2016-08-22 15:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 15:02 [U-Boot] [PATCH 00/11] Add support for Stratix 10 SoC Chin Liang See
2016-08-22 15:02 ` [U-Boot] [PATCH 01/11] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
2016-09-05 15:55 ` Marek Vasut
2016-08-22 15:02 ` [U-Boot] [PATCH 02/11] arm: socfpga: rstmgr: Add Reset Manager for Stratix 10 Chin Liang See
2016-09-05 15:56 ` Marek Vasut
2016-08-22 15:02 ` [U-Boot] [PATCH 03/11] arm: socfpga: rstmgr: Segregate the " Chin Liang See
2016-09-05 15:57 ` Marek Vasut
2016-08-22 15:02 ` [U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock " Chin Liang See
2016-09-05 15:58 ` Marek Vasut
2016-09-06 5:14 ` Chin Liang See
2016-09-06 12:08 ` Marek Vasut
2016-09-07 13:26 ` Chin Liang See
2016-09-07 14:57 ` Marek Vasut
2016-08-22 15:02 ` [U-Boot] [PATCH 05/11] arm: socfpga: fpgamgr: Segregate the FPGA " Chin Liang See
2016-09-05 16:00 ` Marek Vasut
2016-09-06 5:44 ` Chin Liang See
2016-08-22 15:02 ` [U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c " Chin Liang See
2016-09-05 16:01 ` Marek Vasut
2016-09-06 6:19 ` Chin Liang See
2016-09-06 12:09 ` Marek Vasut
2016-09-07 13:28 ` Chin Liang See
2016-09-07 14:57 ` Marek Vasut
2016-08-22 15:02 ` [U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Chin Liang See
2016-09-05 16:02 ` Marek Vasut
2016-09-06 9:41 ` Chin Liang See
2016-09-06 12:12 ` Marek Vasut
2016-09-07 13:31 ` Chin Liang See
2016-09-07 14:54 ` Marek Vasut
2016-08-22 15:02 ` Chin Liang See [this message]
2016-08-22 15:02 ` [U-Boot] [PATCH 09/11] arm: socfpga: stratix10: Add board folder for Stratix 10 socdk Chin Liang See
2016-09-05 16:03 ` Marek Vasut
2016-09-06 6:29 ` Chin Liang See
2016-08-22 15:02 ` [U-Boot] [PATCH 10/11] arm: dts: socfpga: Add dts " Chin Liang See
2016-09-05 16:04 ` Marek Vasut
2016-08-22 15:02 ` [U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Chin Liang See
2016-09-05 16:06 ` Marek Vasut
2016-09-06 9:18 ` Chin Liang See
2016-09-06 12:15 ` Marek Vasut
2016-09-07 13:33 ` Chin Liang See
2016-09-07 14:54 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471878163-3598-9-git-send-email-clsee@altera.com \
--to=clsee@altera.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox