[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@nxp.com>

When running NXP 4.1 kernel with U-Boot mainline we observe a
hang when going into the lowest operational point of cpufreq.

Comparing the DDR calibration values against NXP U-Boot showed
that the values were incorrect.

Adjust the calibration values so that we can avoid such system hang.

Reported-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index c213861..77c561d 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -784,10 +784,10 @@ static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
 };
 
 static struct mx6_mmdc_calibration mx6_mmcd_calib = {
-	.p0_mpwldectrl0 = 0x00070007,
-	.p0_mpdgctrl0 = 0x41490145,
-	.p0_mprddlctl = 0x40404546,
-	.p0_mpwrdlctl = 0x4040524D,
+	.p0_mpwldectrl0 = 0x00000000,
+	.p0_mpdgctrl0 = 0x41570155,
+	.p0_mprddlctl = 0x4040474A,
+	.p0_mpwrdlctl = 0x40405550,
 };
 
 struct mx6_ddr_sysinfo ddr_sysinfo = {
-- 
2.7.4