From: Madan Srinivas <madans@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/7] configs: Adds a defconfig for K2E High Security EVM
Date: Thu, 1 Sep 2016 01:04:42 -0400 [thread overview]
Message-ID: <1472706282-6772-8-git-send-email-madans@ti.com> (raw)
In-Reply-To: <1472706282-6772-1-git-send-email-madans@ti.com>
From: Vitaly Andrianov <vitalya@ti.com>
Add a new defconfig file for the K2E High Security EVM.
This defconfig is the same as for the non-secure part, except for:
CONFIG_TI_SECURE_DEVICE option set to 'y'
CONFIG_FIT option set to 'y'
CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
Enables the platform-specific post-processing of FIT-extracted blobs such
as Kernel, DTB, and initramfs on TI K2E high-security (HS) devices
which will ultimately invokes TI proprietary secure functions
that performs secure processing such as blob authentication and
decryption.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
---
Changes in v2:
- Updates k2e_hs_evm_defconfig to reduce the delta seen if one
regenerates it using savedefconfig or similar tools.
configs/k2e_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 configs/k2e_hs_evm_defconfig
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
new file mode 100644
index 0000000..fc8f22a
--- /dev/null
+++ b/configs/k2e_hs_evm_defconfig
@@ -0,0 +1,43 @@
+CONFIG_ARM=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_TARGET_K2E_EVM=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="k2e-evm"
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="K2E EVM # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_TI_AEMIF=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_ETH=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
--
2.7.4
next prev parent reply other threads:[~2016-09-01 5:04 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <madans@ti.com>
2016-08-26 6:30 ` [U-Boot] [PATCH 0/7] Adds support for secure boot on Keystone SoCs (K2E) Madan Srinivas
2016-08-26 6:30 ` [U-Boot] [PATCH 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Madan Srinivas
2016-08-29 14:52 ` Andrew F. Davis
2016-08-26 6:30 ` [U-Boot] [PATCH 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Madan Srinivas
2016-08-29 16:22 ` Dan Murphy
2016-08-30 9:03 ` Lokesh Vutla
2016-08-26 6:30 ` [U-Boot] [PATCH 3/7] arm: omap-common: Enable support for K2 HS devices in u-boot Madan Srinivas
2016-08-29 14:56 ` Andrew F. Davis
2016-08-29 17:02 ` Dan Murphy
2016-08-26 6:30 ` [U-Boot] [PATCH 4/7] arm: omap-common: Reuse secure image name between OMAP and keystone Madan Srinivas
2016-08-29 15:10 ` Andrew F. Davis
2016-08-26 6:30 ` [U-Boot] [PATCH 5/7] arm: mach-keystone: config.mk: Adds support for secure images on K2 Madan Srinivas
2016-08-29 15:21 ` Andrew F. Davis
2016-08-26 6:30 ` [U-Boot] [PATCH 6/7] doc: Updates info on using keystone secure devices from TI Madan Srinivas
2016-08-26 6:30 ` [U-Boot] [PATCH 7/7] configs: Adds a defconfig for K2E High Security EVM Madan Srinivas
2016-08-29 15:28 ` Andrew F. Davis
2016-09-01 5:04 ` [U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Madan Srinivas
2016-09-01 5:04 ` [U-Boot] [PATCH v2 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Madan Srinivas
2016-09-06 13:34 ` Tom Rini
2016-09-06 13:34 ` Tom Rini
2016-09-01 5:04 ` [U-Boot] [PATCH v2 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Madan Srinivas
2016-09-06 13:34 ` Tom Rini
2016-09-08 15:29 ` Srinivas, Madan
2016-09-01 5:04 ` [U-Boot] [PATCH v2 3/7] arm: omap-common: adds secure image name common to OMAP and keystone Madan Srinivas
2016-09-06 13:34 ` Tom Rini
2016-09-01 5:04 ` [U-Boot] [PATCH v2 4/7] arm: omap-common: Enable support for K2 HS devices in u-boot Madan Srinivas
2016-09-06 13:34 ` Tom Rini
2016-09-01 5:04 ` [U-Boot] [PATCH v2 5/7] arm: mach-keystone: config.mk: Adds support for secure images on K2 Madan Srinivas
2016-09-02 14:35 ` Andrew F. Davis
2016-09-01 5:04 ` [U-Boot] [PATCH v2 6/7] doc: Updates info on using keystone secure devices from TI Madan Srinivas
2016-09-06 13:34 ` Tom Rini
2016-09-01 5:04 ` Madan Srinivas [this message]
2016-09-02 4:25 ` [U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Lokesh Vutla
2016-09-02 16:48 ` Srinivas, Madan
2016-09-03 16:56 ` Lokesh Vutla
2016-09-03 17:23 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472706282-6772-8-git-send-email-madans@ti.com \
--to=madans@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox