From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Mon, 12 Sep 2016 12:01:47 -0300 Subject: [U-Boot] [PATCH] wandboard: Remove videoargs script Message-ID: <1473692507-14715-1-git-send-email-festevam@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Fabio Estevam The videoargs script is kernel version dependent and since wandboard uses distro config, there is no need to handle videoargs locally. In case such video related settings are needed, then the proper location would be the distro extlinux.conf or boot.scr files. So remove 'videoargs' script. Signed-off-by: Fabio Estevam --- include/configs/wandboard.h | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 295f834..d504aec 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -118,32 +118,6 @@ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ "fi; " \ "fi\0" \ - "videoargs=" \ - "setenv nextcon 0; " \ - "if hdmidet; then " \ - "setenv bootargs ${bootargs} " \ - "video=mxcfb${nextcon}:dev=hdmi,1280x720M at 60," \ - "if=RGB24; " \ - "setenv fbmen fbmem=28M; " \ - "setexpr nextcon ${nextcon} + 1; " \ - "else " \ - "echo - no HDMI monitor;" \ - "fi; " \ - "i2c dev 1; " \ - "if i2c probe 0x10; then " \ - "setenv bootargs ${bootargs} " \ - "video=mxcfb${nextcon}:dev=lcd,800x480 at 60," \ - "if=RGB666,bpp=32; " \ - "if test 0 -eq ${nextcon}; then " \ - "setenv fbmem fbmem=10M; " \ - "else " \ - "setenv fbmem ${fbmem},10M; " \ - "fi; " \ - "setexpr nextcon ${nextcon} + 1; " \ - "else " \ - "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ - "fi; " \ - "setenv bootargs ${bootargs} ${fbmem}\0" \ "findfdt="\ "if test $board_name = C1 && test $board_rev = MX6Q ; then " \ "setenv fdtfile imx6q-wandboard.dtb; fi; " \ -- 2.7.4