From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 3/5] regulator: fixed: honour optionality of enable gpio
Date: Fri, 16 Sep 2016 07:47:27 +0000 [thread overview]
Message-ID: <1474012046.3103.5.camel@toradex.com> (raw)
In-Reply-To: <1474011229-21357-4-git-send-email-marcel.ziswiler@toradex.com>
On Fri, 2016-09-16 at 09:33 +0200, Marcel Ziswiler wrote:
> According to the binding documentation the fixed regulator enable
> GPIO
> is optional. However so far registration thereof failed if no enable
> GPIO was specified. Fix this by making it entirely optional whether
> an
> enable GPIO is used.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
> Changes in v4:
> - Use full regulator rather than reg wording again in debug message
> as
> ? suggested by Przemyslaw.
> - Tighten up error handling as suggested by John.
> - Fix set_enable() as suggested by Stephen.
>
> Changes in v3:
> - Introduce new patch to honour optionality of fixed regulator enable
> ? GPIO.
>
> Changes in v2: None
>
> ?drivers/power/regulator/fixed.c | 22 ++++++++++++++++------
> ?1 file changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/power/regulator/fixed.c
> b/drivers/power/regulator/fixed.c
> index 37b8400..6ffb25d 100644
> --- a/drivers/power/regulator/fixed.c
> +++ b/drivers/power/regulator/fixed.c
> @@ -6,6 +6,8 @@
> ? * SPDX-License-Identifier: GPL-2.0+
> ? */
> ?
> +#define DEBUG
> +
Sorry, I just noticed I left DEBUG enabled here, Bummer. I will remove
that in a final version.
> ?#include <common.h>
> ?#include <fdtdec.h>
> ?#include <errno.h>
> @@ -37,11 +39,14 @@ static int
> fixed_regulator_ofdata_to_platdata(struct udevice *dev)
> ? /* Set type to fixed */
> ? uc_pdata->type = REGULATOR_TYPE_FIXED;
> ?
> - /* Get fixed regulator gpio desc */
> + /* Get fixed regulator optional enable GPIO desc */
> ? gpio = &dev_pdata->gpio;
> ? ret = gpio_request_by_name(dev, "gpio", 0, gpio,
> GPIOD_IS_OUT);
> - if (ret)
> - debug("Fixed regulator gpio - not found! Error: %d",
> ret);
> + if (ret) {
> + debug("Fixed regulator optional enable GPIO: %d\n",
> ret);
> + if (ret != -ENOENT)
> + return ret;
> + }
> ?
> ? /* Get optional ramp up delay */
> ? dev_pdata->startup_delay_us = fdtdec_get_uint(gd->fdt_blob,
> @@ -87,8 +92,9 @@ static bool fixed_regulator_get_enable(struct
> udevice *dev)
> ?{
> ? struct fixed_regulator_platdata *dev_pdata =
> dev_get_platdata(dev);
> ?
> + /* Enable GPIO is optional */
> ? if (!dev_pdata->gpio.dev)
> - return false;
> + return true;
> ?
> ? return dm_gpio_get_value(&dev_pdata->gpio);
> ?}
> @@ -98,8 +104,12 @@ static int fixed_regulator_set_enable(struct
> udevice *dev, bool enable)
> ? struct fixed_regulator_platdata *dev_pdata =
> dev_get_platdata(dev);
> ? int ret;
> ?
> - if (!dev_pdata->gpio.dev)
> - return -ENOSYS;
> + /* Enable GPIO is optional */
> + if (!dev_pdata->gpio.dev) {
> + if (!enable)
> + return -ENOSYS;
> + return 0;
> + }
> ?
> ? ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
> ? if (ret) {
next prev parent reply other threads:[~2016-09-16 7:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-16 7:33 [U-Boot] [PATCH v4 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
2016-09-16 7:33 ` [U-Boot] [PATCH v4 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
2016-09-16 7:33 ` [U-Boot] [PATCH v4 2/5] simple panel: fix spelling of debug message Marcel Ziswiler
2016-09-16 7:33 ` [U-Boot] [PATCH v4 3/5] regulator: fixed: honour optionality of enable gpio Marcel Ziswiler
2016-09-16 7:47 ` Marcel Ziswiler [this message]
2016-09-16 17:04 ` Stephen Warren
2016-09-16 7:33 ` [U-Boot] [PATCH v4 4/5] colibri_t20: fix display configuration Marcel Ziswiler
2016-09-16 7:33 ` [U-Boot] [PATCH v4 5/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474012046.3103.5.camel@toradex.com \
--to=marcel.ziswiler@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox