From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 2/2] mx6sabresd: Add SPL support for the mx6dl variant
Date: Mon, 26 Sep 2016 09:14:26 -0300 [thread overview]
Message-ID: <1474892066-32005-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1474892066-32005-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@nxp.com>
Add support for the mx6dlsabresd board in SPL.
Retrieved the DCD table from:
board/freescale/mx6sabresd/mx6dlsabresd.cfg
(NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga)
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v2:
- Newly introduced in this series
board/freescale/mx6sabresd/mx6sabresd.c | 88 +++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 3c36395..986a82b 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -894,6 +894,92 @@ static int mx6qp_dcd_table[] = {
0x021b001c, 0x00000000,
};
+static int mx6dl_dcd_table[] = {
+ 0x020e0774, 0x000C0000,
+ 0x020e0754, 0x00000000,
+ 0x020e04ac, 0x00000030,
+ 0x020e04b0, 0x00000030,
+ 0x020e0464, 0x00000030,
+ 0x020e0490, 0x00000030,
+ 0x020e074c, 0x00000030,
+ 0x020e0494, 0x00000030,
+ 0x020e04a0, 0x00000000,
+ 0x020e04b4, 0x00000030,
+ 0x020e04b8, 0x00000030,
+ 0x020e076c, 0x00000030,
+ 0x020e0750, 0x00020000,
+ 0x020e04bc, 0x00000030,
+ 0x020e04c0, 0x00000030,
+ 0x020e04c4, 0x00000030,
+ 0x020e04c8, 0x00000030,
+ 0x020e04cc, 0x00000030,
+ 0x020e04d0, 0x00000030,
+ 0x020e04d4, 0x00000030,
+ 0x020e04d8, 0x00000030,
+ 0x020e0760, 0x00020000,
+ 0x020e0764, 0x00000030,
+ 0x020e0770, 0x00000030,
+ 0x020e0778, 0x00000030,
+ 0x020e077c, 0x00000030,
+ 0x020e0780, 0x00000030,
+ 0x020e0784, 0x00000030,
+ 0x020e078c, 0x00000030,
+ 0x020e0748, 0x00000030,
+ 0x020e0470, 0x00000030,
+ 0x020e0474, 0x00000030,
+ 0x020e0478, 0x00000030,
+ 0x020e047c, 0x00000030,
+ 0x020e0480, 0x00000030,
+ 0x020e0484, 0x00000030,
+ 0x020e0488, 0x00000030,
+ 0x020e048c, 0x00000030,
+ 0x021b0800, 0xa1390003,
+ 0x021b080c, 0x001F001F,
+ 0x021b0810, 0x001F001F,
+ 0x021b480c, 0x001F001F,
+ 0x021b4810, 0x001F001F,
+ 0x021b083c, 0x4220021F,
+ 0x021b0840, 0x0207017E,
+ 0x021b483c, 0x4201020C,
+ 0x021b4840, 0x01660172,
+ 0x021b0848, 0x4A4D4E4D,
+ 0x021b4848, 0x4A4F5049,
+ 0x021b0850, 0x3F3C3D31,
+ 0x021b4850, 0x3238372B,
+ 0x021b081c, 0x33333333,
+ 0x021b0820, 0x33333333,
+ 0x021b0824, 0x33333333,
+ 0x021b0828, 0x33333333,
+ 0x021b481c, 0x33333333,
+ 0x021b4820, 0x33333333,
+ 0x021b4824, 0x33333333,
+ 0x021b4828, 0x33333333,
+ 0x021b08b8, 0x00000800,
+ 0x021b48b8, 0x00000800,
+ 0x021b0004, 0x0002002D,
+ 0x021b0008, 0x00333030,
+ 0x021b000c, 0x3F435313,
+ 0x021b0010, 0xB66E8B63,
+ 0x021b0014, 0x01FF00DB,
+ 0x021b0018, 0x00001740,
+ 0x021b001c, 0x00008000,
+ 0x021b002c, 0x000026d2,
+ 0x021b0030, 0x00431023,
+ 0x021b0040, 0x00000027,
+ 0x021b0000, 0x831A0000,
+ 0x021b001c, 0x04008032,
+ 0x021b001c, 0x00008033,
+ 0x021b001c, 0x00048031,
+ 0x021b001c, 0x05208030,
+ 0x021b001c, 0x04008040,
+ 0x021b0020, 0x00005800,
+ 0x021b0818, 0x00011117,
+ 0x021b4818, 0x00011117,
+ 0x021b0004, 0x0002556D,
+ 0x021b0404, 0x00011006,
+ 0x021b001c, 0x00000000,
+
+};
static void ddr_init(int *table, int size)
{
int i;
@@ -908,6 +994,8 @@ static void spl_dram_init(void)
ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
else if (is_mx6dqp())
ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
+ else if (is_mx6sdl())
+ ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
}
void board_init_f(ulong dummy)
--
2.7.4
next prev parent reply other threads:[~2016-09-26 12:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-26 12:14 [U-Boot] [PATCH v3 1/2] mx6sabresd: Make SPL DDR configuration to match the DCD table Fabio Estevam
2016-09-26 12:14 ` Fabio Estevam [this message]
2016-09-28 18:56 ` [U-Boot] [PATCH v3 2/2] mx6sabresd: Add SPL support for the mx6dl variant Fabio Estevam
2016-10-04 8:36 ` Stefano Babic
2017-03-29 15:15 ` [U-Boot] [PATCH v3 1/2] mx6sabresd: Make SPL DDR configuration to match the DCD table Jagan Teki
2017-04-04 15:47 ` Jagan Teki
2017-04-04 15:50 ` Fabio Estevam
2017-04-04 17:27 ` Jagan Teki
2017-04-04 23:59 ` Fabio Estevam
2017-04-05 17:33 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474892066-32005-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox