From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/6] imx6: icorem6: Add framebuffer support
Date: Thu, 13 Oct 2016 08:16:52 +0530 [thread overview]
Message-ID: <1476326818-8654-1-git-send-email-jteki@openedev.com> (raw)
On top of u-boot-imx/master engicam patches.
- Add framebuffer support
- Add CMD_BMP and VIDEO_IPV3 kconfig entries
- Move CONFIG_CMD_BMP and CONFIG_VIDEO_IPUV3 to defconfigs
Jagan Teki (6):
video: Kconfig: Add VIDEO_IPV3 entry
Move CONFIG_VIDEO_IPUV3 to defconfig
imx6: icorem6: Add framebuffer support
imx6: icorem6: Add custom splashscreen support
Define/Move CONFIG_CMD_BMP to defconfig
defconfig: icorem6: Enable CONFIG_CMD_BMP
board/engicam/icorem6/icorem6.c | 113 +++++++++++++++++++++
cmd/Kconfig | 10 ++
configs/MPC8610HPCD_defconfig | 1 +
configs/T1024QDS_DDR4_SECURE_BOOT_defconfig | 1 +
configs/T1024QDS_DDR4_defconfig | 1 +
configs/T1024QDS_NAND_defconfig | 1 +
configs/T1024QDS_SDCARD_defconfig | 1 +
configs/T1024QDS_SECURE_BOOT_defconfig | 1 +
configs/T1024QDS_SPIFLASH_defconfig | 1 +
configs/T1024QDS_defconfig | 1 +
configs/T1040QDS_DDR4_defconfig | 1 +
configs/T1040QDS_SECURE_BOOT_defconfig | 1 +
configs/T1040QDS_defconfig | 1 +
configs/TQM5200_B_HIGHBOOT_defconfig | 1 +
configs/TQM5200_B_defconfig | 1 +
configs/TQM5200_STK100_defconfig | 1 +
configs/TQM5200_defconfig | 1 +
configs/aristainetos2_defconfig | 2 +
configs/aristainetos2b_defconfig | 2 +
configs/aristainetos_defconfig | 2 +
configs/brxre1_defconfig | 1 +
configs/cgtqmx6eval_defconfig | 1 +
configs/cm_fx6_defconfig | 2 +
configs/cm_t3517_defconfig | 1 +
configs/cm_t35_defconfig | 1 +
configs/colibri_imx7_defconfig | 1 +
configs/colibri_t20_defconfig | 1 +
...conga-qeval20-qa3-e3845-internal-uart_defconfig | 1 +
configs/conga-qeval20-qa3-e3845_defconfig | 1 +
.../controlcenterd_36BIT_SDCARD_DEVELOP_defconfig | 1 +
configs/controlcenterd_36BIT_SDCARD_defconfig | 1 +
.../controlcenterd_TRAILBLAZER_DEVELOP_defconfig | 1 +
configs/controlcenterd_TRAILBLAZER_defconfig | 1 +
configs/dfi-bt700-q7x-151_defconfig | 1 +
configs/digsy_mtc_RAMBOOT_defconfig | 1 +
configs/digsy_mtc_defconfig | 1 +
configs/digsy_mtc_rev5_RAMBOOT_defconfig | 1 +
configs/digsy_mtc_rev5_defconfig | 1 +
configs/ea20_defconfig | 1 +
configs/gwventana_defconfig | 1 +
configs/icon_defconfig | 1 +
configs/imx31_phycore_defconfig | 1 +
configs/imx31_phycore_eet_defconfig | 1 +
configs/imx6qdl_icore_mmc_defconfig | 2 +
configs/imx6qdl_icore_nand_defconfig | 2 +
configs/ipek01_defconfig | 1 +
configs/ls1021aqds_ddr4_nor_defconfig | 1 +
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 +
configs/ls1021aqds_nand_defconfig | 1 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021aqds_nor_defconfig | 1 +
configs/ls1021aqds_nor_lpuart_defconfig | 1 +
configs/ls1021aqds_qspi_defconfig | 1 +
configs/ls1021aqds_sdcard_ifc_defconfig | 1 +
configs/ls1021aqds_sdcard_qspi_defconfig | 1 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_nor_defconfig | 1 +
configs/ls1021atwr_nor_lpuart_defconfig | 1 +
configs/ls1021atwr_qspi_defconfig | 1 +
.../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_sdcard_ifc_defconfig | 1 +
configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
configs/lwmon5_defconfig | 1 +
configs/m28evk_defconfig | 1 +
configs/m53evk_defconfig | 2 +
configs/ma5d4evk_defconfig | 1 +
configs/mcx_defconfig | 1 +
configs/mt_ventoux_defconfig | 1 +
configs/mx23evk_defconfig | 1 +
configs/mx28evk_auart_console_defconfig | 1 +
configs/mx28evk_defconfig | 1 +
configs/mx28evk_nand_defconfig | 1 +
configs/mx28evk_spi_defconfig | 1 +
configs/mx51evk_defconfig | 1 +
configs/mx53loco_defconfig | 1 +
configs/mx6cuboxi_defconfig | 1 +
configs/mx6qsabreauto_defconfig | 1 +
configs/mx6sabresd_spl_defconfig | 1 +
configs/mx6sxsabresd_defconfig | 1 +
configs/mx6sxsabresd_spl_defconfig | 1 +
configs/mx6ul_14x14_evk_defconfig | 1 +
configs/mx6ul_9x9_evk_defconfig | 1 +
configs/mx7dsabresd_defconfig | 1 +
configs/mx7dsabresd_secure_defconfig | 1 +
configs/nitrogen6dl2g_defconfig | 2 +
configs/nitrogen6dl_defconfig | 2 +
configs/nitrogen6q2g_defconfig | 2 +
configs/nitrogen6q_defconfig | 2 +
configs/nitrogen6s1g_defconfig | 2 +
configs/nitrogen6s_defconfig | 2 +
configs/novena_defconfig | 1 +
configs/nyan-big_defconfig | 1 +
configs/pdm360ng_defconfig | 1 +
configs/pxm2_defconfig | 1 +
configs/rut_defconfig | 1 +
configs/sequoia_defconfig | 1 +
configs/sequoia_ramboot_defconfig | 1 +
configs/socrates_defconfig | 1 +
configs/tbs2910_defconfig | 1 +
configs/theadorable-x86-dfi-bt700_defconfig | 1 +
configs/theadorable_debug_defconfig | 1 +
configs/theadorable_defconfig | 1 +
configs/wandboard_defconfig | 1 +
drivers/video/Kconfig | 7 ++
include/configs/MPC8610HPCD.h | 1 -
include/configs/T102xQDS.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/TQM5200.h | 4 -
include/configs/aristainetos-common.h | 3 -
include/configs/aristainetos2.h | 2 -
include/configs/aristainetos2b.h | 2 -
include/configs/brxre1.h | 1 -
include/configs/cgtqmx6eval.h | 1 -
include/configs/cm_fx6.h | 2 -
include/configs/cm_t35.h | 1 -
include/configs/cm_t3517.h | 1 -
include/configs/colibri_imx7.h | 1 -
include/configs/colibri_t20.h | 1 -
include/configs/conga-qeval20-qa3-e3845.h | 1 -
include/configs/controlcenterd.h | 1 -
include/configs/dfi-bt700.h | 1 -
include/configs/digsy_mtc.h | 3 -
include/configs/ea20.h | 1 -
include/configs/gw_ventana.h | 1 -
include/configs/icon.h | 3 -
include/configs/imx31_phycore.h | 1 -
include/configs/imx6qdl_icore.h | 18 ++++
include/configs/ipek01.h | 3 -
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/lwmon5.h | 4 -
include/configs/m28evk.h | 2 -
include/configs/m53evk.h | 2 -
include/configs/ma5d4evk.h | 1 -
include/configs/mcx.h | 1 -
include/configs/mt_ventoux.h | 1 -
include/configs/mx23evk.h | 1 -
include/configs/mx28evk.h | 1 -
include/configs/mx51evk.h | 1 -
include/configs/mx53loco.h | 1 -
include/configs/mx6cuboxi.h | 1 -
include/configs/mx6sabre_common.h | 1 -
include/configs/mx6sxsabresd.h | 1 -
include/configs/mx6ul_14x14_evk.h | 1 -
include/configs/mx7dsabresd.h | 1 -
include/configs/nitrogen6x.h | 3 -
include/configs/novena.h | 1 -
include/configs/nyan-big.h | 1 -
include/configs/pdm360ng.h | 4 -
include/configs/pxm2.h | 1 -
include/configs/rut.h | 1 -
include/configs/sequoia.h | 1 -
include/configs/socrates.h | 1 -
include/configs/tbs2910.h | 1 -
include/configs/theadorable.h | 1 -
include/configs/wandboard.h | 1 -
tools/logos/engicam.bmp | Bin 0 -> 60214 bytes
157 files changed, 262 insertions(+), 75 deletions(-)
create mode 100755 tools/logos/engicam.bmp
--
2.7.4
next reply other threads:[~2016-10-13 2:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-13 2:46 Jagan Teki [this message]
2016-10-13 2:46 ` [U-Boot] [PATCH v2 1/6] video: Kconfig: Add VIDEO_IPV3 entry Jagan Teki
2016-10-13 2:46 ` [U-Boot] [PATCH v2 2/6] Move CONFIG_VIDEO_IPUV3 to defconfig Jagan Teki
2016-10-13 14:10 ` Soeren Moch
2016-10-13 2:46 ` [U-Boot] [PATCH v2 3/6] imx6: icorem6: Add framebuffer support Jagan Teki
2016-10-13 2:46 ` [U-Boot] [PATCH v2 4/6] imx6: icorem6: Add custom splashscreen support Jagan Teki
2016-10-13 2:46 ` [U-Boot] [PATCH v2 5/6] Define/Move CONFIG_CMD_BMP to defconfig Jagan Teki
2016-10-13 13:09 ` Tom Rini
2016-10-13 2:46 ` [U-Boot] [PATCH v2 6/6] defconfig: icorem6: Enable CONFIG_CMD_BMP Jagan Teki
2016-10-13 13:06 ` [U-Boot] [PATCH v2 0/6] imx6: icorem6: Add framebuffer support Tom Rini
2016-10-13 13:20 ` Jagan Teki
2016-10-13 13:23 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476326818-8654-1-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox