From: Eric Nelson <eric@nelint.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 3/4] mx6: ddr: add routine to return DDR calibration data
Date: Sun, 30 Oct 2016 16:33:49 -0700 [thread overview]
Message-ID: <1477870430-18756-4-git-send-email-eric@nelint.com> (raw)
In-Reply-To: <1477870430-18756-1-git-send-email-eric@nelint.com>
Add routine mmdc_read_calibration() to return the output of DDR
calibration. This can be used for debugging or to aid in construction
of static memory configuration.
This routine will be used in a subsequent patch set adding a virtual
"mx6memcal" board, but could also be useful when gathering statistics
during an initial production run.
Signed-off-by: Eric Nelson <eric@nelint.com>
---
Commit message expanded in V2
arch/arm/cpu/armv7/mx6/ddr.c | 23 +++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 2 ++
2 files changed, 25 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 274a0ba..b12fb64 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -1501,6 +1501,29 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
mdelay(1);
}
+void mmdc_read_calibration(struct mx6_ddr_sysinfo const *sysinfo,
+ struct mx6_mmdc_calibration *calib)
+{
+ struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+ struct mmdc_p_regs *mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+ calib->p0_mpwldectrl0 = readl(&mmdc0->mpwldectrl0);
+ calib->p0_mpwldectrl1 = readl(&mmdc0->mpwldectrl1);
+ calib->p0_mpdgctrl0 = readl(&mmdc0->mpdgctrl0);
+ calib->p0_mpdgctrl1 = readl(&mmdc0->mpdgctrl1);
+ calib->p0_mprddlctl = readl(&mmdc0->mprddlctl);
+ calib->p0_mpwrdlctl = readl(&mmdc0->mpwrdlctl);
+
+ if (sysinfo->dsize == 2) {
+ calib->p1_mpwldectrl0 = readl(&mmdc1->mpwldectrl0);
+ calib->p1_mpwldectrl1 = readl(&mmdc1->mpwldectrl1);
+ calib->p1_mpdgctrl0 = readl(&mmdc1->mpdgctrl0);
+ calib->p1_mpdgctrl1 = readl(&mmdc1->mpdgctrl1);
+ calib->p1_mprddlctl = readl(&mmdc1->mprddlctl);
+ calib->p1_mpwrdlctl = readl(&mmdc1->mpwrdlctl);
+ }
+}
+
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
const struct mx6_mmdc_calibration *calib,
const void *ddr_cfg)
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
index cd5bc97..12454fa 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -461,6 +461,8 @@ void mx6sl_dram_iocfg(unsigned width,
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
int mmdc_do_write_level_calibration(struct mx6_ddr_sysinfo const *sysinfo);
int mmdc_do_dqs_calibration(struct mx6_ddr_sysinfo const *sysinfo);
+void mmdc_read_calibration(struct mx6_ddr_sysinfo const *sysinfo,
+ struct mx6_mmdc_calibration *calib);
#endif
/* configure mx6 mmdc registers */
--
2.7.4
next prev parent reply other threads:[~2016-10-30 23:33 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-30 17:18 [U-Boot] [PATCH 0/3] mx6: ddr: updates for dynamic DDR calibration Eric Nelson
2016-10-30 17:19 ` [U-Boot] [PATCH 1/3] mx6: ddr: allow 32 cycles for DQS gating calibration Eric Nelson
2016-10-30 17:27 ` Marek Vasut
2016-10-30 17:19 ` [U-Boot] [PATCH 2/3] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines Eric Nelson
2016-10-30 17:29 ` Marek Vasut
2016-10-30 17:19 ` [U-Boot] [PATCH 3/3] mx6: ddr: add routine to return DDR calibration data Eric Nelson
2016-10-30 17:30 ` Marek Vasut
2016-10-30 19:14 ` Eric Nelson
2016-10-30 20:02 ` Marek Vasut
2016-10-30 19:20 ` [U-Boot] [PATCH] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines Eric Nelson
2016-10-30 20:03 ` Marek Vasut
2016-10-30 23:10 ` Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 1/4] mx6: ddr: allow 32 cycles for DQS gating calibration Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 2/4] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines Eric Nelson
2016-10-30 23:33 ` Eric Nelson [this message]
2016-10-30 23:33 ` [U-Boot] [PATCH V2 4/4] ARM: mx6: ddr: use Kconfig for inclusion of DDR " Eric Nelson
2016-11-22 10:59 ` [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration Christoph Fritz
2016-11-29 16:28 ` Stefano Babic
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 0/9] ARM: imx: mx6: Add virtual mx6memcal board Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR Eric Nelson
2017-07-14 14:18 ` Fabio Estevam
2017-07-14 17:58 ` Eric Nelson
2017-07-14 19:01 ` Fabio Estevam
2017-07-28 2:50 ` Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 2/9] mx6memcal: zero values for MPWRDLCTL cause read DQS calibration errors Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 3/9] mx6memcal: add configuration for SABRE Lite Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 4/9] mx6memcal: add configuration for Nitrogen6_max board Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 5/9] mx6memcal: add configuration for tr1x board (i.MX6SL with DDR3) Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 6/9] mx6memcal: add configuration for Wandboard Solo (512MiB of x32 DDR3) Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 7/9] mx6memcal: add configuration for Wandboard Quad Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 8/9] mx6memcal: add configuration for mx6slevk Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 9/9] mx6memcal: add configuration for warp board (i.MX6SL) Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 0/3] ARM: imx: mx6: Add plugin support for SPL Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 1/3] ARM: mx6: preserve Boot ROM stack in SPL Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 2/3] ARM: mx6: ddr: add plugin-utils placeholder Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 3/3] ARM: imx: mx6memcal: allow build of combined SPL+U-Boot Eric Nelson
2017-01-18 1:27 ` [U-Boot] [RFC PATCH 0/3] ARM: imx: mx6: Add plugin support for SPL Tim Harvey
2017-01-18 17:05 ` Eric Nelson
2017-01-18 18:49 ` Tim Harvey
2017-01-18 19:01 ` Fabio Estevam
2017-01-20 17:40 ` Tim Harvey
2017-01-27 14:56 ` Fabio Estevam
2017-01-27 15:25 ` Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477870430-18756-4-git-send-email-eric@nelint.com \
--to=eric@nelint.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox