From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 04/13] dm: net: fec: Add .read_rom_hwaddr
Date: Tue, 6 Dec 2016 00:00:51 +0100 [thread overview]
Message-ID: <1480978860-4351-5-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1480978860-4351-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add .read_rom_hwaddr on dm eth_ops.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/net/fec_mxc.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 2c4be96..3304fddc 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1165,12 +1165,21 @@ int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))
#else
+static int fecmxc_read_rom_hwaddr(struct udevice *dev)
+{
+ struct fec_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+
+ return fec_get_hwaddr(priv->dev_id, pdata->enetaddr);
+}
+
static const struct eth_ops fecmxc_ops = {
.start = fecmxc_init,
.send = fecmxc_send,
.recv = fecmxc_recv,
.stop = fecmxc_halt,
.write_hwaddr = fecmxc_set_hwaddr,
+ .read_rom_hwaddr = fecmxc_read_rom_hwaddr,
};
static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
@@ -1200,7 +1209,6 @@ static int fecmxc_probe(struct udevice *dev)
struct fec_priv *priv = dev_get_priv(dev);
struct mii_dev *bus = NULL;
int dev_id = -1;
- unsigned char ethaddr[6];
uint32_t start;
int ret;
@@ -1235,14 +1243,6 @@ static int fecmxc_probe(struct udevice *dev)
fec_set_dev_name((char *)dev->name, dev_id);
priv->dev_id = (dev_id == -1) ? 0 : dev_id;
- ret = fec_get_hwaddr(dev_id, ethaddr);
- if (!ret) {
- debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
- memcpy(pdata->enetaddr, ethaddr, 6);
- if (!getenv("ethaddr"))
- eth_setenv_enetaddr("ethaddr", ethaddr);
- }
-
return 0;
err_timeout:
--
1.9.1
next prev parent reply other threads:[~2016-12-05 23:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 23:00 [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 01/13] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 02/13] net: fec_mxc: Convert into driver model Jagan Teki
2016-12-09 18:22 ` Joe Hershberger
2016-12-09 22:26 ` Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 03/13] net: fec_mxc: Driver cleanups Jagan Teki
2016-12-05 23:00 ` Jagan Teki [this message]
2016-12-05 23:00 ` [U-Boot] [PATCH v3 05/13] ARM: dts: imx6qdl-icore: Add FEC support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 06/13] icorem6: Use CONFIG_DM_ETH support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 07/13] video: Kconfig: Add VIDEO_IPV3 entry Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 08/13] imx6: icorem6: Add framebuffer support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 09/13] imx6: icorem6: Add custom splashscreen support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry Jagan Teki
2016-12-06 14:06 ` Heiko Schocher
2016-12-06 15:45 ` Jagan Teki
2016-12-06 14:47 ` Fabio Estevam
2016-12-06 15:44 ` Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 11/13] i2c: mxc: Print hex instead of decimal for bus address Jagan Teki
2016-12-06 14:07 ` Heiko Schocher
2016-12-05 23:00 ` [U-Boot] [PATCH v3 12/13] i2c: mxc: Make 'no gpio pinctrl state' print as debug Jagan Teki
2016-12-06 14:08 ` Heiko Schocher
2016-12-05 23:01 ` [U-Boot] [PATCH v3 13/13] imx6: icorem6: Add I2C support Jagan Teki
2016-12-06 14:10 ` Heiko Schocher
2016-12-06 17:25 ` Jagan Teki
2016-12-07 16:01 ` [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and " Jagan Teki
2016-12-13 12:36 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480978860-4351-5-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox