From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Date: Tue, 13 Dec 2016 17:56:50 +0100 [thread overview]
Message-ID: <1481648226-30773-1-git-send-email-jagan@openedev.com> (raw)
From: Jagan Teki <jagan@amarulasolutions.com>
This is v4 for previous v3, v2 series[1] [2] on top of [3] series
Changes for v4:
- Add FEC patches.
Changes for v3:
- Add I2C support
Changes for v2:
- Add 'Acked-by' from Joe
- Add new i.CoreM6 RQS patches
[1] https://www.mail-archive.com/u-boot at lists.denx.de/msg230990.html
[2] https://www.mail-archive.com/u-boot at lists.denx.de/msg230283.html
[3] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support
Jagan Teki (16):
arm: dts: Add devicetree for i.MX6UL
arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
arm: dts: imx6ul-geam: Add I2C nodes
imx6: geam6ul: Add I2C support
imx6: geam6ul: Add NAND support
imx6: geam6ul: Enable MTD device support
imx6: geam6ul: Add default mtd nand partition table
arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial
support
arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial
support
imx6: icorem6: Rename engicam icorem6 defconfig files
arm: dts: imx6qdl-icore-rqs: Add I2C node's
imx6: icorem6_rqs: Add I2C support
arm: dts: imx6ul-geam: Add FEC node
imx6: geam6ul: Add FEC support
arm: dts: imx6qdl-icore-rqs: Add FEC node
imx6: icorem6_rqs: Add FEC support
arch/arm/cpu/armv7/mx6/Kconfig | 26 +
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/imx6dl-icore-rqs.dts | 50 ++
arch/arm/dts/imx6q-icore-rqs.dts | 50 ++
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 170 ++++
arch/arm/dts/imx6ul-geam-kit.dts | 168 ++++
arch/arm/dts/imx6ul.dtsi | 942 +++++++++++++++++++++
board/engicam/geam6ul/Kconfig | 12 +
board/engicam/geam6ul/MAINTAINERS | 6 +
board/engicam/geam6ul/Makefile | 6 +
board/engicam/geam6ul/README | 28 +
board/engicam/geam6ul/geam6ul.c | 317 +++++++
board/engicam/icorem6/MAINTAINERS | 6 +-
board/engicam/icorem6/README | 19 +-
board/engicam/icorem6_rqs/Kconfig | 12 +
board/engicam/icorem6_rqs/MAINTAINERS | 7 +
board/engicam/icorem6_rqs/Makefile | 6 +
board/engicam/icorem6_rqs/README | 33 +
board/engicam/icorem6_rqs/icorem6_rqs.c | 399 +++++++++
...re_mmc_defconfig => imx6dl_icore_mmc_defconfig} | 0
..._nand_defconfig => imx6dl_icore_nand_defconfig} | 0
configs/imx6dl_icore_rqs_mmc_defconfig | 43 +
configs/imx6q_icore_mmc_defconfig | 46 +
configs/imx6q_icore_nand_defconfig | 41 +
configs/imx6q_icore_rqs_mmc_defconfig | 43 +
configs/imx6ul_geam_mmc_defconfig | 44 +
configs/imx6ul_geam_nand_defconfig | 37 +
include/configs/imx6qdl_icore_rqs.h | 135 +++
include/configs/imx6ul_geam.h | 165 ++++
include/dt-bindings/clock/imx6ul-clock.h | 1 +
30 files changed, 2802 insertions(+), 15 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-icore-rqs.dts
create mode 100644 arch/arm/dts/imx6q-icore-rqs.dts
create mode 100644 arch/arm/dts/imx6qdl-icore-rqs.dtsi
create mode 100644 arch/arm/dts/imx6ul-geam-kit.dts
create mode 100644 arch/arm/dts/imx6ul.dtsi
create mode 100644 board/engicam/geam6ul/Kconfig
create mode 100644 board/engicam/geam6ul/MAINTAINERS
create mode 100644 board/engicam/geam6ul/Makefile
create mode 100644 board/engicam/geam6ul/README
create mode 100644 board/engicam/geam6ul/geam6ul.c
create mode 100644 board/engicam/icorem6_rqs/Kconfig
create mode 100644 board/engicam/icorem6_rqs/MAINTAINERS
create mode 100644 board/engicam/icorem6_rqs/Makefile
create mode 100644 board/engicam/icorem6_rqs/README
create mode 100644 board/engicam/icorem6_rqs/icorem6_rqs.c
rename configs/{imx6qdl_icore_mmc_defconfig => imx6dl_icore_mmc_defconfig} (100%)
rename configs/{imx6qdl_icore_nand_defconfig => imx6dl_icore_nand_defconfig} (100%)
create mode 100644 configs/imx6dl_icore_rqs_mmc_defconfig
create mode 100644 configs/imx6q_icore_mmc_defconfig
create mode 100644 configs/imx6q_icore_nand_defconfig
create mode 100644 configs/imx6q_icore_rqs_mmc_defconfig
create mode 100644 configs/imx6ul_geam_mmc_defconfig
create mode 100644 configs/imx6ul_geam_nand_defconfig
create mode 100644 include/configs/imx6qdl_icore_rqs.h
create mode 100644 include/configs/imx6ul_geam.h
--
1.9.1
next reply other threads:[~2016-12-13 16:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-13 16:56 Jagan Teki [this message]
2016-12-13 16:56 ` [U-Boot] [PATCH v4 01/16] arm: dts: Add devicetree for i.MX6UL Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 02/16] arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 03/16] arm: dts: imx6ul-geam: Add I2C nodes Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 04/16] imx6: geam6ul: Add I2C support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 05/16] imx6: geam6ul: Add NAND support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 06/16] imx6: geam6ul: Enable MTD device support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 07/16] imx6: geam6ul: Add default mtd nand partition table Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 08/16] arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 09/16] arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite " Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 10/16] imx6: icorem6: Rename engicam icorem6 defconfig files Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 11/16] arm: dts: imx6qdl-icore-rqs: Add I2C node's Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 12/16] imx6: icorem6_rqs: Add I2C support Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 13/16] arm: dts: imx6ul-geam: Add FEC node Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 14/16] imx6: geam6ul: Add FEC support Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 15/16] arm: dts: imx6qdl-icore-rqs: Add FEC node Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 16/16] imx6: icorem6_rqs: Add FEC support Jagan Teki
2016-12-16 9:23 ` [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support Jagan Teki
2016-12-16 15:42 ` Stefano Babic
2016-12-16 16:00 ` Jagan Teki
2016-12-16 16:08 ` Jagan Teki
2016-12-16 16:29 ` Stefano Babic
2016-12-16 16:52 ` Jagan Teki
2016-12-16 17:27 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481648226-30773-1-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox