From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 15/16] arm: dts: imx6qdl-icore-rqs: Add FEC node
Date: Tue, 13 Dec 2016 17:57:05 +0100 [thread overview]
Message-ID: <1481648226-30773-16-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1481648226-30773-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add FEC node for Engicam i.CoreM6 RQS modules.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 46 +++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 2aaa6e4..750229b 100644
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -48,6 +48,31 @@
};
};
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-handle = <ð_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ mdio {
+ eth_phy: ethernet-phy {
+ rxc-skew-ps = <1140>;
+ txc-skew-ps = <1140>;
+ txen-skew-ps = <600>;
+ rxdv-skew-ps = <240>;
+ rxd0-skew-ps = <420>;
+ rxd1-skew-ps = <600>;
+ rxd2-skew-ps = <420>;
+ rxd3-skew-ps = <240>;
+ txd0-skew-ps = <60>;
+ txd1-skew-ps = <60>;
+ txd2-skew-ps = <60>;
+ txd3-skew-ps = <240>;
+ };
+ };
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -83,6 +108,27 @@
};
&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
--
1.9.1
next prev parent reply other threads:[~2016-12-13 16:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-13 16:56 [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 01/16] arm: dts: Add devicetree for i.MX6UL Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 02/16] arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 03/16] arm: dts: imx6ul-geam: Add I2C nodes Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 04/16] imx6: geam6ul: Add I2C support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 05/16] imx6: geam6ul: Add NAND support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 06/16] imx6: geam6ul: Enable MTD device support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 07/16] imx6: geam6ul: Add default mtd nand partition table Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 08/16] arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support Jagan Teki
2016-12-13 16:56 ` [U-Boot] [PATCH v4 09/16] arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite " Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 10/16] imx6: icorem6: Rename engicam icorem6 defconfig files Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 11/16] arm: dts: imx6qdl-icore-rqs: Add I2C node's Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 12/16] imx6: icorem6_rqs: Add I2C support Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 13/16] arm: dts: imx6ul-geam: Add FEC node Jagan Teki
2016-12-13 16:57 ` [U-Boot] [PATCH v4 14/16] imx6: geam6ul: Add FEC support Jagan Teki
2016-12-13 16:57 ` Jagan Teki [this message]
2016-12-13 16:57 ` [U-Boot] [PATCH v4 16/16] imx6: icorem6_rqs: " Jagan Teki
2016-12-16 9:23 ` [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support Jagan Teki
2016-12-16 15:42 ` Stefano Babic
2016-12-16 16:00 ` Jagan Teki
2016-12-16 16:08 ` Jagan Teki
2016-12-16 16:29 ` Stefano Babic
2016-12-16 16:52 ` Jagan Teki
2016-12-16 17:27 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481648226-30773-16-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox