public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/10] defconfigs: engicam: Enable MMC commands in nand
Date: Wed, 21 Dec 2016 12:00:23 +0100	[thread overview]
Message-ID: <1482318029-21701-5-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1482318029-21701-1-git-send-email-jagan@openedev.com>

From: Jagan Teki <jagan@amarulasolutions.com>

For writing Linux or rootfs on to NAND, the best suitable way
is to use MMC commands since MMC driver by default enabled by
mx6_common.h, hence enabled MMC commands in nand defconfigs.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 configs/imx6dl_icore_nand_defconfig | 5 +++++
 configs/imx6q_icore_nand_defconfig  | 5 +++++
 configs/imx6ul_geam_nand_defconfig  | 5 +++++
 3 files changed, 15 insertions(+)

diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig
index 4e81a41..7f45744 100644
--- a/configs/imx6dl_icore_nand_defconfig
+++ b/configs/imx6dl_icore_nand_defconfig
@@ -18,8 +18,13 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y
diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig
index 274e62b..572e33a 100644
--- a/configs/imx6q_icore_nand_defconfig
+++ b/configs/imx6q_icore_nand_defconfig
@@ -18,8 +18,13 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
index a21c53a..55fa003 100644
--- a/configs/imx6ul_geam_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -17,10 +17,15 @@ CONFIG_SYS_MAXARGS=32
 # CONFIG_DM_MMC_OPS is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y
-- 
1.9.1

  parent reply	other threads:[~2016-12-21 11:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-21 11:00 [U-Boot] [PATCH 00/10] i.MX6: engicam: Add nandboot env and FIT support Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 01/10] configs: engicam: Increase nand kernel partition size Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 02/10] imx6: engicam: Use bootm instead of bootz Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 03/10] configs: engicam: Rename nand with gpmi-name in mtdparts Jagan Teki
2016-12-21 11:00 ` Jagan Teki [this message]
2016-12-21 11:00 ` [U-Boot] [PATCH 05/10] defconfigs: engicam: Enable UBI commands Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 06/10] imx6: engicam: Add nandboot env support Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 07/10] defconfigs: imx6: engicam: Enable FIT Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 08/10] configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 09/10] configs: engicam: Cleanup on mmcboot env Jagan Teki
2016-12-21 11:00 ` [U-Boot] [PATCH 10/10] configs: engicam: Add fitboot env support Jagan Teki
2016-12-29 13:37 ` [U-Boot] [PATCH 00/10] i.MX6: engicam: Add nandboot env and FIT support Jagan Teki
2017-01-01 19:05   ` Jagan Teki
2017-01-02 16:19     ` Stefano Babic
2017-01-02 16:52 ` Stefano Babic
2017-01-02 16:58   ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1482318029-21701-5-git-send-email-jagan@openedev.com \
    --to=jagan@openedev.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox