[U-Boot] [PATCH 2/4] imx6: Add imx6_src_get_boot_mode

Jagan Teki
2017-01-10T23:10:18Z

For i.MX6, the bootmode determine code is part of spl_boot_device,
but there is might be a possibility for other part the code need to
check the desired boot mode for adding new functionalities like
modeboot env variable, or changing boot order etc.

So introduced imx6_src_get_boot_mode which actually reading the
boot mode register for desired modes.

More cleanup will be add in future patches.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
---
arch/arm/imx-common/init.c | 22 ++++++++++++++++++++++
arch/arm/imx-common/spl.c | 6 +++---
arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +++++
3 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c
index e5dbd93..986c0d0 100644
--- a/arch/arm/imx-common/init.c
+++ b/arch/arm/imx-common/init.c
@@ -115,3 +115,25 @@ void boot_mode_apply(unsigned cfg_val)
writel(reg, &psrc->gpr10);
}
#endif
+
+#if defined(CONFIG_MX6)
+bool inline is_boot_device_from_gpr9(void)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ bool val;
+
+ val = readl(&psrc->gpr10) & IMX6_SRC_GPR10_BMODE;
+
+ return val;
+}
+
+u32 imx6_src_get_boot_mode(void)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+
+ if (is_boot_device_from_gpr9())
+ return readl(&psrc->gpr9);
+ else
+ return readl(&psrc->sbmr1);
+}
+#endif
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
index c86b6f8..950c70d 100644
--- a/arch/arm/imx-common/spl.c
+++ b/arch/arm/imx-common/spl.c
@@ -10,6 +10,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
#include <asm/spl.h>
#include <spl.h>
#include <asm/imx-common/hab.h>
@@ -19,16 +20,15 @@
u32 spl_boot_device(void)
{
struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned int gpr10_boot = readl(&psrc->gpr10) & (1 << 28);
- unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1);
unsigned int bmode = readl(&psrc->sbmr2);
+ u32 reg = imx6_src_get_boot_mode();

/*
* Check for BMODE if serial downloader is enabled
* BOOT_MODE - see IMX6DQRM Table 8-1
*/
if ((((bmode >> 24) & 0x03) == 0x01) || /* Serial Downloader */
- (gpr10_boot && (reg == 1)))
+ (is_boot_device_from_gpr9() && (reg == 1)))
return BOOT_DEVICE_UART;
/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
switch ((reg & 0x000000FF) >> 4) {
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 16c9b76..868f668 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -6,3 +6,8 @@
*/

#include <asm/imx-common/sys_proto.h>
+
+#define IMX6_SRC_GPR10_BMODE BIT(28)
+
+bool is_boot_device_from_gpr9(void);
+u32 imx6_src_get_boot_mode(void);
--
1.9.1