From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jagan Teki <jagan@openedev.com>
Date: Fri, 20 Jan 2017 00:02:45 +0100
Subject: [U-Boot] [PATCH v3 9/9] imx6ul: isiotmx6ul: Enable I2C support
In-Reply-To: <1484866965-22216-1-git-send-email-jagan@openedev.com>
References: <1484866965-22216-1-git-send-email-jagan@openedev.com>
Message-ID: <1484866965-22216-10-git-send-email-jagan@openedev.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

From: Jagan Teki <jagan@amarulasolutions.com>

Enable I2C support for Engicam Is.IoT NAND module.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 configs/imx6ul_isiot_nand_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig
index bc99d7d..79f08a6 100644
--- a/configs/imx6ul_isiot_nand_defconfig
+++ b/configs/imx6ul_isiot_nand_defconfig
@@ -31,6 +31,7 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_I2C=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y
@@ -38,6 +39,7 @@ CONFIG_NAND_MXS=y
 CONFIG_IMX_THERMAL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-- 
1.9.1