[U-Boot] [PATCH 2/7] arm: socfpga: update cyclone5 socdk default environment

[Dalon Westergreen <dwesterg@gmail.com>]

From: Dalon Westergreen <dalon.westergreen@intel.com>

The default values for CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
and CONFIG_SYS_MMCSD_FS_OS_PARTITION have changed and as
as result the default uboot environment for this board
needs updating.  This sets the default envirnment to
use the CONFIG_SYS_MMCSD_FS_BOOT_PARTITION and
CONFIG_SYS_MMCSD_FS_OS_PARTITION configs for the boot
and os partitions.

Also set the default fdtimage value to match the
devicetree name in the linux kernel for this board.

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
---
 include/configs/socfpga_cyclone5_socdk.h | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h
index 7ced6a6..94355ce 100644
--- a/include/configs/socfpga_cyclone5_socdk.h
+++ b/include/configs/socfpga_cyclone5_socdk.h
@@ -44,15 +44,17 @@
 		"bootm ${loadaddr} - ${fdt_addr}\0" \
 	"bootimage=zImage\0" \
 	"fdt_addr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
+	"fdtimage=socfpga_cyclone5_socdk.dtb\0" \
 	"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
+	"mmc_boot=" __stringify(CONFIG_SYS_MMCSD_FS_BOOT_PARTITION) "\0" \
+	"mmc_os=" __stringify(CONFIG_SYS_MMCSD_FS_OS_PARTITION) "\0" \
+	"mmcroot=/dev/mmcblk0p${mmc_os}\0" \
 	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
 		" root=${mmcroot} rw rootwait;" \
 		"bootz ${loadaddr} - ${fdt_addr}\0" \
 	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+		"load mmc 0:${mmc_boot} ${loadaddr} ${bootimage};" \
+		"load mmc 0:${mmc_boot} ${fdt_addr} ${fdtimage}\0" \
 	"qspiload=sf probe && mtdparts default && run ubiload\0" \
 	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
 		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-- 
2.7.4