From: Michael Kurz <michi.kurz@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/9] ARM: stm32: add network and qspi driver support to stm32f746-disco board
Date: Sun, 22 Jan 2017 16:04:21 +0100 [thread overview]
Message-ID: <1485097470-71245-1-git-send-email-michi.kurz@gmail.com> (raw)
This series adds support for the network and the qspi devices found on
the stm32f746 controller and enables those devices on the
stm32f746-disco board.
Changes in v4:
- Correct commit message and add linux source file path
- Update to current master
- Fix missing newline at end of file
- Removed currently not used entries from dts file
- Add binding document for qspi driver
- Disable qspi quad interface in dts file here
- Split struct stm32_rcc_regs into two structs (common and stm32f7 specific)
- Reword commit message
- Add Acked-by tag to 'fix stm32f7 sdram fmc base address'
- Add Reviewed-by tag to 'use clock setup function defined in clock.c'
- Remove dts patch as the dts import patch now disables the quad interface
Changes in v3:
- Split pin control files of from device tree patch
- Add Acked-by tag to 'add stm32f746 device tree pin control files'
- Split pin control files of from device tree patch
- Add Acked-by tag to 'add stm32f746-disco device tree files'
- Removed 'prefix all constants with STM32_'
- Reverted move of header into source file (rcc.h -> clock.c)
- Split cleanup patch
- Split clock setup changes of from cleanup patch
- Add Acked-by tag to 'add designware mac glue code for stm32'
- Moved qspi rcc bits into rcc header
- Drop 'add missing flag to micron/stm N25Q128 flash chips' patch
Changes in v2:
- Add cleanup patch
- Replaced bit shifts and masks with BIT() and GENMASK() macro
- Moved STM32_SYSCFG_BASE into stm32.h header
- Add Acked-by tag to 'net: phy: add SMSC LAN8742 phy'
- Replaced bit shifts and masks with BIT() and GENMASK() macro
Michael Kurz (9):
ARM: DTS: stm32: add stm32f746 device tree pin control files
ARM: DTS: stm32: add stm32f746-disco device tree files
ARM: stm32: cleanup stm32f7 files
ARM: stm32: fix stm32f7 sdram fmc base address
ARM: stm32: use clock setup function defined in clock.c
net: stm32: add designware mac glue code for stm32
net: phy: add SMSC LAN8742 phy
ARM: stm32: enable support for smsc phy on stm32f746-disco board
ARM: SPI: stm32: add stm32f746 qspi driver
arch/arm/dts/Makefile | 2 +
arch/arm/dts/armv7-m.dtsi | 25 +
arch/arm/dts/stm32f746-disco.dts | 96 ++
arch/arm/dts/stm32f746.dtsi | 79 ++
arch/arm/include/asm/arch-stm32f7/fmc.h | 9 +-
arch/arm/include/asm/arch-stm32f7/gpt.h | 6 +-
arch/arm/include/asm/arch-stm32f7/rcc.h | 77 +-
arch/arm/include/asm/arch-stm32f7/stm32.h | 14 +-
arch/arm/include/asm/arch-stm32f7/stm32_periph.h | 10 +-
arch/arm/include/asm/arch-stm32f7/syscfg.h | 38 +
arch/arm/mach-stm32/stm32f7/clock.c | 171 ++-
arch/arm/mach-stm32/stm32f7/timer.c | 4 +-
board/st/stm32f746-disco/stm32f746-disco.c | 124 +-
configs/stm32f746-disco_defconfig | 23 +-
doc/device-tree-bindings/spi/spi-stm32-qspi.txt | 39 +
drivers/net/designware.c | 1 +
drivers/net/phy/smsc.c | 12 +
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/stm32_qspi.c | 628 ++++++++++
include/configs/stm32f746-disco.h | 10 +-
include/dt-bindings/pinctrl/stm32f746-pinfunc.h | 1324 ++++++++++++++++++++++
22 files changed, 2540 insertions(+), 161 deletions(-)
create mode 100644 arch/arm/dts/armv7-m.dtsi
create mode 100644 arch/arm/dts/stm32f746-disco.dts
create mode 100644 arch/arm/dts/stm32f746.dtsi
create mode 100644 arch/arm/include/asm/arch-stm32f7/syscfg.h
create mode 100644 doc/device-tree-bindings/spi/spi-stm32-qspi.txt
create mode 100644 drivers/spi/stm32_qspi.c
create mode 100644 include/dt-bindings/pinctrl/stm32f746-pinfunc.h
--
2.1.4
next reply other threads:[~2017-01-22 15:04 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-22 15:04 Michael Kurz [this message]
2017-01-22 15:04 ` [U-Boot] [PATCH v4 1/9] ARM: DTS: stm32: add stm32f746 device tree pin control files Michael Kurz
2017-01-28 22:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 2/9] ARM: DTS: stm32: add stm32f746-disco device tree files Michael Kurz
2017-01-28 22:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 3/9] ARM: stm32: cleanup stm32f7 files Michael Kurz
2017-01-24 19:35 ` Vikas MANOCHA
2017-01-28 22:45 ` [U-Boot] [U-Boot,v4,3/9] " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 4/9] ARM: stm32: fix stm32f7 sdram fmc base address Michael Kurz
2017-01-28 22:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 5/9] ARM: stm32: use clock setup function defined in clock.c Michael Kurz
2017-01-28 22:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 6/9] net: stm32: add designware mac glue code for stm32 Michael Kurz
2017-01-28 22:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 7/9] net: phy: add SMSC LAN8742 phy Michael Kurz
2017-01-28 22:45 ` [U-Boot] [U-Boot,v4,7/9] " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 8/9] ARM: stm32: enable support for smsc phy on stm32f746-disco board Michael Kurz
2017-01-28 22:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-22 15:04 ` [U-Boot] [PATCH v4 9/9] ARM: SPI: stm32: add stm32f746 qspi driver Michael Kurz
2017-01-28 22:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-24 19:39 ` [U-Boot] [PATCH v4 0/9] ARM: stm32: add network and qspi driver support to stm32f746-disco board Vikas MANOCHA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485097470-71245-1-git-send-email-michi.kurz@gmail.com \
--to=michi.kurz@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox