From mboxrd@z Thu Jan  1 00:00:00 1970
From: Westergreen, Dalon <dalon.westergreen@intel.com>
Date: Wed, 25 Jan 2017 03:35:45 +0000
Subject: [U-Boot] [PATCH v4 1/7] arm: socfpga: add env settings to
	common header
In-Reply-To: <2f76d433-3423-9af5-8568-15a167e00a6f@kernel.org>
References: <1485277563-18514-1-git-send-email-dwesterg@gmail.com>
 <1485277563-18514-2-git-send-email-dwesterg@gmail.com>
 <2f76d433-3423-9af5-8568-15a167e00a6f@kernel.org>
Message-ID: <1485315343.7052.135.camel@intel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tue, 2017-01-24 at 21:31 -0600, Dinh Nguyen wrote:
> 
> On 01/24/2017 11:05 AM, Dalon Westergreen wrote:
> > 
> > From: Dalon Westergreen <dalon.westergreen@intel.com>
> > 
> > Move repeated environment settings for socfpga boards
> > to a common header.
> > 
> > The default values for the boot partition and the
> > OS filesystem partition have changed and as
> > as result the default uboot environment for socfpga
> > boards needs updating.
> > 
> > Move to using??CONFIG_DEFAULT_DEVICE_TREE for setting the
> > default linux devicetree used during linux boot.
> > 
> > Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
> > ---
> > ?include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++
> > ?1 file changed, 27 insertions(+)
> > 
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h
> > index 6285266..bdd6e2f 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> > ? * Stack setup
> > ? */
> > ?#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> > +	
> > +/* Extra Environment */
> > +#ifndef CONFIG_EXTRA_ENV_SETTINGS
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > +	"verify=n\0" \
> > +	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > +	"bootimage=" CONFIG_BOOTFILE "\0" \
> > +	"fdt_addr=100\0" \
> > +	"fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \
> > +	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
> > +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> > +	"mmcroot=/dev/mmcblk0p3\0" \
> 
> Should this be mmcblk0p2?
that was the point of the patches, p1 is now the
a2 partition, so the fat and root partition?
shifted up by 1.

> 
> Dinh
-- 
------------------------------------------
Dalon Westergreen
Embedded Specialist
Intel Programmable Solutions Group
Phone :?1.858.202.3518
------------------------------------------