From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 3/7] arm: socfpga: update cyclone5 socdk default environment
Date: Thu, 26 Jan 2017 12:31:07 -0800 [thread overview]
Message-ID: <1485462671-27830-4-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1485462671-27830-1-git-send-email-dwesterg@gmail.com>
From: Dalon Westergreen <dalon.westergreen@intel.com>
Remove the default environment as it is now in a common
header.
Add the CONFIG_DEFAULT_DEVICE_TREE to the board's defconfig
to set the linux devicetree name.
Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
---
configs/socfpga_cyclone5_defconfig | 1 +
include/configs/socfpga_cyclone5_socdk.h | 25 -------------------------
2 files changed, 1 insertion(+), 25 deletions(-)
diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig
index 8b050b9..cba1e9c 100644
--- a/configs/socfpga_cyclone5_defconfig
+++ b/configs/socfpga_cyclone5_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk"
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socdk.dtb"
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h
index 7ced6a6..96b2b87 100644
--- a/include/configs/socfpga_cyclone5_socdk.h
+++ b/include/configs/socfpga_cyclone5_socdk.h
@@ -36,31 +36,6 @@
#define CONFIG_ENV_IS_IN_MMC
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "bootimage=zImage\0" \
- "fdt_addr=100\0" \
- "fdtimage=socfpga.dtb\0" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
- " root=${mmcroot} rw rootwait;" \
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "mmcload=mmc rescan;" \
- "load mmc 0:1 ${loadaddr} ${bootimage};" \
- "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
- "qspiload=sf probe && mtdparts default && run ubiload\0" \
- "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
- " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "ubiload=ubi part UBI && ubifsmount ubi0 && " \
- "ubifsload ${loadaddr} /boot/${bootimage} && " \
- "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
--
2.7.4
next prev parent reply other threads:[~2017-01-26 20:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-26 20:31 [U-Boot] [PATCH v7 0/7] arm: socfpga: update default u-boot environment Dalon Westergreen
2017-01-26 20:31 ` [U-Boot] [PATCH v7 1/7] arm: socfpga: add env settings to common header Dalon Westergreen
2017-01-26 20:31 ` [U-Boot] [PATCH v7 2/7] arm: socfpga: update de0 nano default environment Dalon Westergreen
2017-01-26 20:31 ` Dalon Westergreen [this message]
2017-01-26 20:31 ` [U-Boot] [PATCH v7 4/7] arm: socfpga: update arria5 socdk " Dalon Westergreen
2017-01-26 20:31 ` [U-Boot] [PATCH v7 5/7] arm: socfpga: Update DE1 environment Dalon Westergreen
2017-01-26 20:31 ` [U-Boot] [PATCH v7 6/7] arm: socfpga: Update SoCKit environment Dalon Westergreen
2017-01-26 20:31 ` [U-Boot] [PATCH v7 7/7] arm: socfpga: Update sr1500 environment Dalon Westergreen
2017-01-26 20:54 ` [U-Boot] [PATCH v7 0/7] arm: socfpga: update default u-boot environment Marek Vasut
2017-01-26 21:05 ` Dalon Westergreen
2017-01-26 21:41 ` Marek Vasut
2017-01-26 22:33 ` Dalon Westergreen
2017-01-27 2:11 ` Marek Vasut
2017-01-27 2:30 ` Dalon Westergreen
2017-01-27 4:24 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485462671-27830-4-git-send-email-dwesterg@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox