From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATC v2 00/15] imx6: Engicam i.CoreM6/Is.IoT eMMC boot support
Date: Fri, 27 Jan 2017 15:12:28 +0100 [thread overview]
Message-ID: <1485526363-3834-1-git-send-email-jagan@openedev.com> (raw)
From: Jagan Teki <jagan@amarulasolutions.com>
This series support boot from eMMC on Engicam i.CoreM6 QDL/Is.IoT boards.
Changes for v2:
- Rebase on master
- Add Is.IoT eMMC boot patches
- Add few mmc env patches on board
Jagan Teki (15):
imx6: Add imx6_src_get_boot_mode
imx: spl: Update NAND bootmode detection bit
imx: Use IMX6_BMODE_* macros instead of numericals
imx6: Add src_base structure define macro
imx6: isiotmx6ul: Update SPL board boot order for eMMC
i.MX6UL: isiot: Add eMMC boot support
i.MX6UL: isiot: Add modeboot env via board_late_init
i.MX6UL: isiot: Add mmc_late_init
i.MX6UL: isiot: Switch the mmc env based on devno
arm: dts: imx6qdl-icore-rqs: Add eMMC node
imx6: icorem6_rqs: Update SPL board boot order for eMMC
imx6: icorem6_rqs: Add eMMC boot support
i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
i.MX6Q: icorem6_rqs: Add mmc_late_init
i.MX6Q: isiot: Switch the mmc env based on devno
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++
arch/arm/dts/imx6ul-isiot-emmc.dts | 77 +++++++++++++++++++++
arch/arm/imx-common/init.c | 10 +++
arch/arm/imx-common/spl.c | 50 ++++++++------
arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +
arch/arm/include/asm/imx-common/sys_proto.h | 46 +++++++++++++
board/engicam/icorem6_rqs/icorem6_rqs.c | 96 +++++++++++++++++++++++++-
board/engicam/isiotmx6ul/MAINTAINERS | 1 +
board/engicam/isiotmx6ul/isiotmx6ul.c | 101 +++++++++++++++++++++++++++-
configs/imx6dl_icore_rqs_mmc_defconfig | 1 +
configs/imx6q_icore_rqs_mmc_defconfig | 1 +
configs/imx6ul_isiot_emmc_defconfig | 40 +++++++++++
configs/imx6ul_isiot_mmc_defconfig | 1 +
configs/imx6ul_isiot_nand_defconfig | 1 +
include/configs/imx6qdl_icore_rqs.h | 36 +++++-----
include/configs/imx6ul_isiot.h | 40 +++++------
17 files changed, 460 insertions(+), 66 deletions(-)
create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts
create mode 100644 configs/imx6ul_isiot_emmc_defconfig
--
1.9.1
next reply other threads:[~2017-01-27 14:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 14:12 Jagan Teki [this message]
2017-01-27 14:12 ` [U-Boot] [PATCH v2 01/15] imx6: Add imx6_src_get_boot_mode Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 02/15] imx: spl: Update NAND bootmode detection bit Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 03/15] imx: Use IMX6_BMODE_* macros instead of numericals Jagan Teki
2017-01-27 15:18 ` Eric Nelson
2017-01-27 17:21 ` Jagan Teki
2017-01-27 17:29 ` Eric Nelson
2017-01-27 17:54 ` Jagan Teki
2017-01-27 18:10 ` Eric Nelson
2017-01-27 18:26 ` Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 04/15] imx6: Add src_base structure define macro Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 05/15] imx6: isiotmx6ul: Update SPL board boot order for eMMC Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 06/15] i.MX6UL: isiot: Add eMMC boot support Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 07/15] i.MX6UL: isiot: Add modeboot env via board_late_init Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 08/15] i.MX6UL: isiot: Add mmc_late_init Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 09/15] i.MX6UL: isiot: Switch the mmc env based on devno Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 10/15] arm: dts: imx6qdl-icore-rqs: Add eMMC node Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 11/15] imx6: icorem6_rqs: Update SPL board boot order for eMMC Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 12/15] imx6: icorem6_rqs: Add eMMC boot support Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 13/15] i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 14/15] i.MX6Q: icorem6_rqs: Add mmc_late_init Jagan Teki
2017-01-27 14:12 ` [U-Boot] [PATCH v2 15/15] i.MX6Q: isiot: Switch the mmc env based on devno Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485526363-3834-1-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox