From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] SPL: add support to boot from a partition type
Date: Sat, 28 Jan 2017 19:13:16 -0800 [thread overview]
Message-ID: <1485659596-5453-1-git-send-email-dwesterg@gmail.com> (raw)
From: Dalon Westergreen <dalon.westergreen@intel.com>
the socfpga bootrom supports mmc booting from either a raw image
starting at 0x0, or from a partition of type 0xa2. This patch
adds support for locating the boot image in the first type 0xa2
partition found.
Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
---
common/spl/Kconfig | 17 +++++++++++++++++
common/spl/spl_mmc.c | 13 +++++++++++++
disk/part_dos.c | 1 +
include/part.h | 1 +
4 files changed, 32 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index b1aa148..a0430ec 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -97,6 +97,23 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
Address on the MMC to load U-Boot from, when the MMC is being used
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
+config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ bool "MMC raw mode: by partition type"
+ depends on SPL
+ default y if ARCH_SOCFPGA
+ help
+ Use partition type for specifying U-Boot partition on MMC/SD in
+ raw mode. U-Boot will be loaded from the first partition of this
+ type to be found.
+
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
+ hex "Partition Type on the MMC to load U-Boot from"
+ depends on SPL && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ default 0xa2 if ARCH_SOCFPGA
+ help
+ Partition Type on the MMC to load U-Boot from, when the MMC is being
+ used in raw mode.
+
config TPL
bool
depends on SPL && SUPPORT_TPL
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 0cd355c..cce9584 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -157,6 +157,19 @@ static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
disk_partition_t info;
int err;
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ if ( partition == -1 ) {
+ /* Only support MBR so DOS_ENTRY_NUMBERS */
+ for (partition = 1; partition <= DOS_ENTRY_NUMBERS; partition++) {
+ err = part_get_info(mmc_get_blk_desc(mmc), partition, &info);
+ if(err)
+ continue;
+ if(info.sys_ind == CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE)
+ break;
+ }
+ }
+#endif
+
err = part_get_info(mmc_get_blk_desc(mmc), partition, &info);
if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/disk/part_dos.c b/disk/part_dos.c
index ed78334..f485f11 100644
--- a/disk/part_dos.c
+++ b/disk/part_dos.c
@@ -217,6 +217,7 @@ static int part_get_info_extended(struct blk_desc *dev_desc,
#ifdef CONFIG_PARTITION_UUIDS
sprintf(info->uuid, "%08x-%02x", disksig, part_num);
#endif
+ info->sys_ind = pt->sys_ind;
return 0;
}
diff --git a/include/part.h b/include/part.h
index 0979005..a58b687 100644
--- a/include/part.h
+++ b/include/part.h
@@ -59,6 +59,7 @@ typedef struct disk_partition {
#ifdef CONFIG_PARTITION_TYPE_GUID
char type_guid[37]; /* type GUID as string, if exists */
#endif
+ uchar sys_ind; /* partition type */
} disk_partition_t;
/* Misc _get_dev functions */
--
2.7.4
next reply other threads:[~2017-01-29 3:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-29 3:13 Dalon Westergreen [this message]
2017-01-30 14:37 ` [U-Boot] [PATCH v2] SPL: add support to boot from a partition type Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485659596-5453-1-git-send-email-dwesterg@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox