[U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

From: Roger Quadros <rogerq@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address
Date: Mon, 30 Jan 2017 17:15:14 +0200	[thread overview]
Message-ID: <1485789316-22216-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1485789316-22216-1-git-send-email-rogerq@ti.com>

In stead of defining the board EEPROM address in the board headers
let's define them in the board config files and make them
configurable by Kconfig.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/Kconfig                  | 10 ++++++++++
 configs/am57xx_evm_defconfig      |  2 ++
 configs/am57xx_evm_nodt_defconfig |  2 ++
 configs/am57xx_hs_evm_defconfig   |  2 ++
 configs/dra7xx_evm_defconfig      |  2 ++
 configs/dra7xx_hs_evm_defconfig   |  2 ++
 include/configs/am57xx_evm.h      |  4 ----
 include/configs/dra7xx_evm.h      |  4 ----
 8 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c04adfb..19886ad 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1009,6 +1009,16 @@ config TARGET_THUNDERX_88XX
 
 endchoice
 
+config EEPROM_BUS_ADDRESS
+        int "Board EEPROM's I2C bus address"
+        range 0 8
+        default 0
+
+config EEPROM_CHIP_ADDRESS
+        hex "Board EEPROM's I2C chip address"
+        range 0 0xff
+        default 0x50
+
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm283x/Kconfig"
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 656d991..3b3e74a 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
 CONFIG_OMAP54XX=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_ARMV7_LPAE=y
diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig
index b3b95f9..8d722e7 100644
--- a/configs/am57xx_evm_nodt_defconfig
+++ b/configs/am57xx_evm_nodt_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
 CONFIG_OMAP54XX=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index d920d68..36c8004 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -3,6 +3,8 @@ CONFIG_OMAP54XX=y
 CONFIG_TI_SECURE_DEVICE=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
 CONFIG_TI_SECURE_EMIF_REGION_START=0xbe000000
 CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
 CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 1836021..3108c58 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
 CONFIG_OMAP54XX=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_ARMV7_LPAE=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 1d107e4..7f5ce49 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TI_SECURE_DEVICE=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
 CONFIG_TI_SECURE_EMIF_REGION_START=0xbe000000
 CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
 CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 840502c..d9e1119 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -105,10 +105,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 
-/* EEPROM */
-#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
-#define CONFIG_EEPROM_BUS_ADDRESS 0
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index da458a4..46beb8b 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -264,8 +264,4 @@
 #endif
 #endif  /* NOR support */
 
-/* EEPROM */
-#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
-#define CONFIG_EEPROM_BUS_ADDRESS 0
-
 #endif /* __CONFIG_DRA7XX_EVM_H */
-- 
2.7.4

next prev parent reply	other threads:[~2017-01-30 15:15 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-30 15:15 [U-Boot] [u-boot PATCH v2 0/8] am57xx-idk LCD and am571x-idk 6 port ethernet pinmux Roger Quadros
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 1/8] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro Roger Quadros
2017-01-31  4:08   ` Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 2/8] ti: common: board_detect: commodify ethaddr environment setting code Roger Quadros
2017-01-31  4:08   ` Lokesh Vutla
2017-01-31 21:38   ` Tom Rini
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 3/8] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD Roger Quadros
2017-01-31  4:10   ` Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 4/8] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet Roger Quadros
2017-01-31  4:10   ` Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 5/8] board: ti: am57xx-idk: Auto detect LCD Panel Roger Quadros
2017-01-30 15:15 ` Roger Quadros [this message]
2017-01-31  4:17   ` [U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address Lokesh Vutla
2017-02-01  9:42     ` Roger Quadros
2017-02-01 10:47       ` Lokesh Vutla
2017-02-01 12:01         ` Roger Quadros
2017-02-01 12:14           ` Tom Rini
2017-02-01 13:05             ` Roger Quadros
2017-02-01 13:44               ` Tom Rini
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 7/8] ARM: k2g: setup PRU ethernet MAC addresses Roger Quadros
2017-01-31  4:18   ` Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 8/8] ti: common: board_detect: Rename EEPROM scratch start macro Roger Quadros
2017-01-31 21:38   ` Tom Rini

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:c04adfb dfblob:19886ad dfblob:656d991 dfblob:3b3e74a
dfblob:b3b95f9 dfblob:8d722e7 dfblob:d920d68 dfblob:36c8004
dfblob:1836021 dfblob:3108c58 dfblob:1d107e4 dfblob:7f5ce49
dfblob:840502c dfblob:d9e1119 dfblob:da458a4 dfblob:46beb8b )
 OR (
bs:"[U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1485789316-22216-7-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox