From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 04/15] imx6: Add src_base structure define macro
Date: Thu, 2 Feb 2017 15:56:02 +0100 [thread overview]
Message-ID: <1486047373-31676-5-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1486047373-31676-1-git-send-email-jagan@openedev.com>
Instead of initializing 'struct src' to SRC_BASE_ADDR on
every function better to have global define macro.
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@openedev.com>
---
arch/arm/imx-common/init.c | 6 ++----
arch/arm/imx-common/spl.c | 3 +--
arch/arm/include/asm/arch-mx6/imx-regs.h | 2 ++
arch/arm/include/asm/imx-common/sys_proto.h | 4 +---
4 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c
index 036ebb2..5b4f828 100644
--- a/arch/arm/imx-common/init.c
+++ b/arch/arm/imx-common/init.c
@@ -119,11 +119,9 @@ void boot_mode_apply(unsigned cfg_val)
#if defined(CONFIG_MX6)
u32 imx6_src_get_boot_mode(void)
{
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
-
if (imx6_is_bmode_from_gpr9())
- return readl(&psrc->gpr9);
+ return readl(&src_base->gpr9);
else
- return readl(&psrc->sbmr1);
+ return readl(&src_base->sbmr1);
}
#endif
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
index acf268d..c8723bb 100644
--- a/arch/arm/imx-common/spl.c
+++ b/arch/arm/imx-common/spl.c
@@ -19,8 +19,7 @@
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
u32 spl_boot_device(void)
{
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned int bmode = readl(&psrc->sbmr2);
+ unsigned int bmode = readl(&src_base->sbmr2);
u32 reg = imx6_src_get_boot_mode();
/*
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 6727c56..646013d 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -473,6 +473,8 @@ struct src {
u32 gpr10;
};
+#define src_base ((struct src *)SRC_BASE_ADDR)
+
#define SRC_SCR_M4_ENABLE_OFFSET 22
#define SRC_SCR_M4_ENABLE_MASK (1 << 22)
#define SRC_SCR_M4C_NON_SCLR_RST_OFFSET 4
diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h
index ba95641..673527a 100644
--- a/arch/arm/include/asm/imx-common/sys_proto.h
+++ b/arch/arm/include/asm/imx-common/sys_proto.h
@@ -78,9 +78,7 @@ enum imx6_bmode {
static inline u8 imx6_is_bmode_from_gpr9(void)
{
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
-
- return readl(&psrc->gpr10) & IMX6_SRC_GPR10_BMODE;
+ return readl(&src_base->gpr10) & IMX6_SRC_GPR10_BMODE;
}
u32 imx6_src_get_boot_mode(void);
--
1.9.1
next prev parent reply other threads:[~2017-02-02 14:56 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 14:55 [U-Boot] [PATCH v3 00/15] imx6: Engicam i.CoreM6/Is.IoT eMMC boot support Jagan Teki
2017-02-02 14:55 ` [U-Boot] [PATCH v3 01/15] imx6: Add imx6_src_get_boot_mode Jagan Teki
2017-02-19 15:49 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 02/15] imx: spl: Update NAND bootmode detection bit Jagan Teki
2017-02-19 15:50 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 03/15] imx: Use IMX6_BMODE_* macros instead of numericals Jagan Teki
2017-02-19 15:50 ` Stefano Babic
2017-02-02 14:56 ` Jagan Teki [this message]
2017-02-19 15:51 ` [U-Boot] [PATCH v3 04/15] imx6: Add src_base structure define macro Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 05/15] imx6: isiotmx6ul: Update SPL board boot order for eMMC Jagan Teki
2017-02-19 15:51 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 06/15] i.MX6UL: isiot: Add eMMC boot support Jagan Teki
2017-02-19 15:52 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 07/15] i.MX6UL: isiot: Add modeboot env via board_late_init Jagan Teki
2017-02-19 15:52 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 08/15] i.MX6UL: isiot: Add mmc_late_init Jagan Teki
2017-02-19 15:53 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 09/15] i.MX6UL: isiot: Switch the mmc env based on devno Jagan Teki
2017-02-02 14:56 ` [U-Boot] [PATCH v3 10/15] arm: dts: imx6qdl-icore-rqs: Add eMMC node Jagan Teki
2017-02-19 15:58 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 11/15] imx6: icorem6_rqs: Update SPL board boot order for eMMC Jagan Teki
2017-02-19 15:59 ` Stefano Babic
2017-02-02 14:56 ` [U-Boot] [PATCH v3 12/15] imx6: icorem6_rqs: Add eMMC boot support Jagan Teki
2017-02-02 14:56 ` [U-Boot] [PATCH v3 13/15] i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init Jagan Teki
2017-02-02 14:56 ` [U-Boot] [PATCH v3 14/15] i.MX6Q: icorem6_rqs: Add mmc_late_init Jagan Teki
2017-02-02 14:56 ` [U-Boot] [PATCH v3 15/15] i.MX6Q: isiot: Switch the mmc env based on devno Jagan Teki
2017-02-19 16:00 ` Stefano Babic
2017-02-22 10:40 ` Jagan Teki
2017-02-22 10:49 ` Stefano Babic
2017-02-13 5:30 ` [U-Boot] [PATCH v3 00/15] imx6: Engicam i.CoreM6/Is.IoT eMMC boot support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486047373-31676-5-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox