From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v8 1/2] SPL: add support to boot from a partition type
Date: Fri, 10 Feb 2017 16:04:48 -0800 [thread overview]
Message-ID: <1486771488.6338.182.camel@gmail.com> (raw)
In-Reply-To: <618e627b-89ad-ded9-ecf6-1db07392b499@denx.de>
On Sat, 2017-02-11 at 00:47 +0100, Marek Vasut wrote:
> On 02/10/2017 11:58 PM, Dalon Westergreen wrote:
> >
> > the socfpga bootrom supports mmc booting from either a raw image
> > starting at 0x0, or from a partition of type 0xa2.??This patch
> > adds support for locating the boot image in the first type 0xa2
> > partition found.
> >
> > Assigned a partition number of -1 will cause a search for a
> > partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
> > and use it to find the u-boot image
> >
> > Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
> >
> > --
> > Changes in v8:
> > ?- Move partition type default to arch/arm/mach-socfpga/Kconfig
> > Changes in v7:
> > ?- set part type to 0xa2 only if socfpga selected
> > Changes in V6:
> > ?- Remove unneeded backslash
> > Changes in V5:
> > ?- fix styling in if (..) per Tom's request
> > Changes in V4:
> > ?- Try search for partition type and failover to the defined
> > ???partition number
> > Changes in V3:
> > ?- Add depends on DOS_PARTITION
> > ?- Ensure that PARTTION_TYPE defaults to non-zero
> > ?- Add ifdef around sys_ind in disk_partition structure
> > Changes in V2:
> > ?- Merge partition search into single partition function
> > ---
> > ?arch/arm/mach-socfpga/Kconfig |??3 +++
> > ?common/spl/Kconfig????????????| 16 ++++++++++++++++
> > ?common/spl/spl_mmc.c??????????| 15 +++++++++++++++
> > ?disk/part_dos.c???????????????|??1 +
> > ?include/part.h????????????????|??3 +++
> > ?5 files changed, 38 insertions(+)
> >
> > diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
> > index df9e8d4..6fd724e 100644
> > --- a/arch/arm/mach-socfpga/Kconfig
> > +++ b/arch/arm/mach-socfpga/Kconfig
> > @@ -27,6 +27,9 @@ config SPL_SPI_SUPPORT
> > ?config SPL_WATCHDOG_SUPPORT
> > ? default y
> > ?
> > +config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
> > + default 0xa2
> > +
> > ?config TARGET_SOCFPGA_ARRIA5
> > ? bool
> > ? select TARGET_SOCFPGA_GEN5
> > diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> > index cf714c2..3cdd200 100644
> > --- a/common/spl/Kconfig
> > +++ b/common/spl/Kconfig
> > @@ -96,6 +96,22 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
> > ? ??Address on the MMC to load U-Boot from, when the MMC is being
> > used
> > ? ??in raw mode. Units: MMC sectors (1 sector = 512 bytes).
> > ?
> > +config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
> > + bool "MMC raw mode: by partition type"
> > + depends on SPL && DOS_PARTITION
> > + default y if ARCH_SOCFPGA
>
> SoCFPGA should select this, ARCH_SOCFPGA has nothing to do in common
> stuff :)
>
Odd, i did test it and it worked in hw
> >
> > + help
> > + ??Use partition type for specifying U-Boot partition on MMC/SD in
> > + ??raw mode. U-Boot will be loaded from the first partition of this
> > + ??type to be found.
> > +
> > +config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
> > + hex "Partition Type on the MMC to load U-Boot from"
> > + depends on SPL && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
> > + help
> > + ??Partition Type on the MMC to load U-Boot from, when the MMC is
> > being
> > + ??used in raw mode.
> > +
> > ?config TPL
> > ? bool
> > ? depends on SPL && SUPPORT_TPL
> > diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> > index 0cd355c..fb51fd5 100644
> > --- a/common/spl/spl_mmc.c
> > +++ b/common/spl/spl_mmc.c
> > @@ -157,6 +157,21 @@ static int mmc_load_image_raw_partition(struct
> > spl_image_info *spl_image,
> > ? disk_partition_t info;
> > ? int err;
> > ?
> > +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
> > + int type_part;
> > + /* Only support MBR so DOS_ENTRY_NUMBERS */
> > + for (type_part = 1; type_part <= DOS_ENTRY_NUMBERS; type_part++) {
> > + err = part_get_info(mmc_get_blk_desc(mmc), type_part,
> > &info);
> > + if (err)
> > + continue;
> > + if (info.sys_ind ==?
> > + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE) {
> > + partition = type_part;
> > + break;
> > + }
> > + }
> > +#endif
> > +
> > ? err = part_get_info(mmc_get_blk_desc(mmc), partition, &info);
> > ? if (err) {
> > ?#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
> > diff --git a/disk/part_dos.c b/disk/part_dos.c
> > index c77d881..7ede15e 100644
> > --- a/disk/part_dos.c
> > +++ b/disk/part_dos.c
> > @@ -217,6 +217,7 @@ static int part_get_info_extended(struct blk_desc
> > *dev_desc,
> > ?#if CONFIG_IS_ENABLED(PARTITION_UUIDS)
> > ? sprintf(info->uuid, "%08x-%02x", disksig,
> > part_num);
> > ?#endif
> > + info->sys_ind = pt->sys_ind;
> > ? return 0;
> > ? }
> > ?
> > diff --git a/include/part.h b/include/part.h
> > index 9d0e20d..b6d1b33 100644
> > --- a/include/part.h
> > +++ b/include/part.h
> > @@ -59,6 +59,9 @@ typedef struct disk_partition {
> > ?#ifdef CONFIG_PARTITION_TYPE_GUID
> > ? char type_guid[37]; /* type GUID as string, if exists
> > */
> > ?#endif
> > +#ifdef CONFIG_DOS_PARTITION
> > + uchar sys_ind; /* partition type?
> > */
> > +#endif
> > ?} disk_partition_t;
> > ?
> > ?/* Misc _get_dev functions */
> >
>
>
next prev parent reply other threads:[~2017-02-11 0:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-10 22:58 [U-Boot] [PATCH v7 0/2] SPL: Add support to boot a partition type Dalon Westergreen
2017-02-10 22:58 ` [U-Boot] [PATCH v8 1/2] SPL: add support to boot from " Dalon Westergreen
2017-02-10 23:47 ` Marek Vasut
2017-02-11 0:04 ` Dalon Westergreen [this message]
2017-02-11 3:25 ` Tom Rini
2017-02-10 22:58 ` [U-Boot] [PATCH v8 2/2] SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig Dalon Westergreen
2017-02-11 3:25 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486771488.6338.182.camel@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox