public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/8] arm: socfpga: Add distro boot to socfpga common header
Date: Sat, 18 Feb 2017 12:51:41 -0800	[thread overview]
Message-ID: <1487451108-4277-2-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1487451108-4277-1-git-send-email-dwesterg@gmail.com>

This adds a common environment and support for distro boot
in the common socfpga header.

Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
---
 include/configs/socfpga_common.h | 55 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 582b04a..2b8be8f 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -67,6 +67,9 @@
 #define CONFIG_SYS_HOSTNAME	CONFIG_SYS_BOARD
 #endif
 
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+
 /*
  * Cache
  */
@@ -245,13 +248,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  * U-Boot environment
  */
 #if !defined(CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_SIZE			(8*1024)
 #endif
 
 /* Environment for SDMMC boot */
 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
+#define CONFIG_SYS_MMC_ENV_DEV		0		/* device 0 */
+#define CONFIG_ENV_OFFSET		(34*512)/* just after the GPT */
 #endif
 
 /* Environment for QSPI boot */
@@ -308,8 +311,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	2
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot-dtb.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#endif
+#else
+#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	1
 #endif
 #endif
 
@@ -331,4 +338,44 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  */
 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
 
+/* Extra Environment */
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+
+#ifdef CONFIG_CMD_PXE
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_PXE(func) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=n\0" \
+	"bootimage=" CONFIG_BOOTFILE "\0" \
+	"fdt_addr=100\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"bootm_size=0xa000000\0" \
+	"kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
+	"fdt_addr_r=0x02000000\0" \
+	"scriptaddr=0x02100000\0" \
+	"pxefile_addr_r=0x02200000\0" \
+	"ramdisk_addr_r=0x02300000\0" \
+	BOOTENV
+
+#endif
+#endif
+
 #endif	/* __CONFIG_SOCFPGA_COMMON_H__ */
-- 
2.7.4

  reply	other threads:[~2017-02-18 20:51 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-18 20:51 [U-Boot] [PATCH 0/8] arm: socfpga: Move to using distro boot Dalon Westergreen
2017-02-18 20:51 ` Dalon Westergreen [this message]
2017-02-18 21:01   ` [U-Boot] [PATCH 1/8] arm: socfpga: Add distro boot to socfpga common header Marek Vasut
2017-02-18 23:29     ` Dalon Westergreen
2017-02-19  0:37       ` Marek Vasut
2017-02-19  1:10         ` Dalon Westergreen
2017-02-19  2:26           ` Marek Vasut
2017-02-19 19:45           ` Pavel Machek
2017-02-19 19:59             ` Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 2/8] arm: socfpga: DE0 use environment in " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 3/8] arm: socfpga: A5 SoCDK " Dalon Westergreen
2017-02-18 20:58   ` Marek Vasut
2017-02-18 20:51 ` [U-Boot] [PATCH 4/8] arm: socfpga: C5 " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 5/8] arm: socfpga: DE1 " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 6/8] arm: socfpga: SoCKit " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 7/8] arm: socfpga: Socrates " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 8/8] arm: socfpga: sr1500 " Dalon Westergreen
2017-02-18 20:56   ` Marek Vasut
2017-02-18 23:31     ` Dalon Westergreen
2017-02-19  0:33       ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1487451108-4277-2-git-send-email-dwesterg@gmail.com \
    --to=dwesterg@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox