From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/8] arm: socfpga: sr1500 use environment in common header
Date: Sat, 18 Feb 2017 12:51:48 -0800 [thread overview]
Message-ID: <1487451108-4277-9-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1487451108-4277-1-git-send-email-dwesterg@gmail.com>
This removes the default environment from the sr1500 header
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.
This board has no upstream devicetree in the kernel source,
so leave the default devicetree name socfpga.dtb.
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
---
configs/socfpga_sr1500_defconfig | 1 +
include/configs/socfpga_sr1500.h | 27 ---------------------------
2 files changed, 1 insertion(+), 27 deletions(-)
diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig
index 981600b..b0925ab 100644
--- a/configs/socfpga_sr1500_defconfig
+++ b/configs/socfpga_sr1500_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_SR1500=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500"
+CONFIG_DEFAULT_FDT_FILE="socfpga.dtb"
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index f67fafd..d94771c 100644
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -17,8 +17,6 @@
/* Booting Linux */
#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
@@ -28,31 +26,6 @@
#define CONFIG_PHY_MARVELL
#define PHY_ANEG_TIMEOUT 8000
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "bootimage=zImage\0" \
- "fdt_addr=100\0" \
- "fdtimage=socfpga.dtb\0" \
- "fsloadcmd=ext2load\0" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
- " root=${mmcroot} rw rootwait;" \
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "mmcload=mmc rescan;" \
- "load mmc 0:1 ${loadaddr} ${bootimage};" \
- "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
- "qspiload=sf probe && mtdparts default && run ubiload\0" \
- "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
- " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "ubiload=ubi part UBI && ubifsmount ubi0 && " \
- "ubifsload ${loadaddr} /boot/${bootimage} && " \
- "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
/* Environment */
#define CONFIG_ENV_IS_IN_SPI_FLASH
--
2.7.4
next prev parent reply other threads:[~2017-02-18 20:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-18 20:51 [U-Boot] [PATCH 0/8] arm: socfpga: Move to using distro boot Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 1/8] arm: socfpga: Add distro boot to socfpga common header Dalon Westergreen
2017-02-18 21:01 ` Marek Vasut
2017-02-18 23:29 ` Dalon Westergreen
2017-02-19 0:37 ` Marek Vasut
2017-02-19 1:10 ` Dalon Westergreen
2017-02-19 2:26 ` Marek Vasut
2017-02-19 19:45 ` Pavel Machek
2017-02-19 19:59 ` Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 2/8] arm: socfpga: DE0 use environment in " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 3/8] arm: socfpga: A5 SoCDK " Dalon Westergreen
2017-02-18 20:58 ` Marek Vasut
2017-02-18 20:51 ` [U-Boot] [PATCH 4/8] arm: socfpga: C5 " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 5/8] arm: socfpga: DE1 " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 6/8] arm: socfpga: SoCKit " Dalon Westergreen
2017-02-18 20:51 ` [U-Boot] [PATCH 7/8] arm: socfpga: Socrates " Dalon Westergreen
2017-02-18 20:51 ` Dalon Westergreen [this message]
2017-02-18 20:56 ` [U-Boot] [PATCH 8/8] arm: socfpga: sr1500 " Marek Vasut
2017-02-18 23:31 ` Dalon Westergreen
2017-02-19 0:33 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487451108-4277-9-git-send-email-dwesterg@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox