From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 3/8] arm: socfpga: A5 SoCDK use environment in common header
Date: Sat, 18 Feb 2017 20:07:55 -0800 [thread overview]
Message-ID: <1487477280-21077-4-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1487477280-21077-1-git-send-email-dwesterg@gmail.com>
This removes the default environment from the A5 socdk headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.
Add support to boot from the custom a2 type partition.
Change default devicetree name to match devicetree name in
upstream kernel source.
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
--
Changes in v2:
- Remove unneeded CONFIG_BOOTFILE
- Fix dtb name
---
configs/socfpga_arria5_defconfig | 3 +++
include/configs/socfpga_arria5_socdk.h | 32 --------------------------------
2 files changed, 3 insertions(+), 32 deletions(-)
diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig
index 43c51fe..a49f6fa 100644
--- a/configs/socfpga_arria5_defconfig
+++ b/configs/socfpga_arria5_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk"
+CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_socdk.dtb"
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
@@ -64,3 +65,5 @@ CONFIG_G_DNL_MANUFACTURER="altera"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
CONFIG_USE_TINY_PRINTF=y
+ONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2
diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h
index 9b1f753..b60d007 100644
--- a/include/configs/socfpga_arria5_socdk.h
+++ b/include/configs/socfpga_arria5_socdk.h
@@ -16,13 +16,6 @@
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */
/* Booting Linux */
-#define CONFIG_BOOTFILE "zImage"
-#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_BOOTCOMMAND "run ramboot"
-#else
-#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
-#endif
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
@@ -34,31 +27,6 @@
#define CONFIG_ENV_IS_IN_MMC
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "bootimage=zImage\0" \
- "fdt_addr=100\0" \
- "fdtimage=socfpga.dtb\0" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
- " root=${mmcroot} rw rootwait;" \
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "mmcload=mmc rescan;" \
- "load mmc 0:1 ${loadaddr} ${bootimage};" \
- "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
- "qspiload=sf probe && mtdparts default && run ubiload\0" \
- "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
- " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "ubiload=ubi part UBI && ubifsmount ubi0 && " \
- "ubifsload ${loadaddr} /boot/${bootimage} && " \
- "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
--
2.7.4
next prev parent reply other threads:[~2017-02-19 4:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-19 4:07 [U-Boot] [PATCH v3 0/8] arm: socfpga: Move to using distro boot Dalon Westergreen
2017-02-19 4:07 ` [U-Boot] [PATCH v3 1/8] arm: socfpga: Add distro boot to socfpga common header Dalon Westergreen
2017-02-19 4:07 ` [U-Boot] [PATCH v3 2/8] arm: socfpga: DE0 use environment in " Dalon Westergreen
2017-02-19 4:07 ` Dalon Westergreen [this message]
2017-02-19 4:07 ` [U-Boot] [PATCH v3 4/8] arm: socfpga: C5 SoCDK " Dalon Westergreen
2017-02-19 4:07 ` [U-Boot] [PATCH v3 5/8] arm: socfpga: DE1 " Dalon Westergreen
2017-02-19 4:07 ` [U-Boot] [PATCH v3 6/8] arm: socfpga: SoCKit " Dalon Westergreen
2017-02-19 4:07 ` [U-Boot] [PATCH v3 7/8] arm: socfpga: Socrates " Dalon Westergreen
2017-02-19 4:08 ` [U-Boot] [PATCH v3 8/8] arm: socfpga: sr1500 " Dalon Westergreen
2017-02-19 10:36 ` [U-Boot] [PATCH v3 0/8] arm: socfpga: Move to using distro boot Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487477280-21077-4-git-send-email-dwesterg@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox