From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 00/10] imx6ul: Add Engicam Is.IoT MX6UL support
Date: Fri, 24 Feb 2017 15:32:52 +0530 [thread overview]
Message-ID: <1487930582-9951-1-git-send-email-jagan@openedev.com> (raw)
From: Jagan Teki <jagan@amarulasolutions.com>
This patch set support Engicam Is.IoT MX6UL board support.
Changes for v6:
- Remove 'arm: dts: Add MAINTAINERS file' patch
- Rebase to master
Changes for v5:
- Update ccgr_init so-that it can enable required clocks
- Add new patch for dts files include under board MAINTAINERS
- Add new patch for arch/arm/dts/MAINTAINERS file
- Update 'Reviewed-by: Stefano Babic <sbabic@denx.de>' tag
Changes for v4:
- Rebase to master
Changes for v3:
- Rebase to master
Changes for v2:
- Skiped eMMC node patch
- Rebase to master
Jagan Teki (10):
configs: imx6: Don't define USDHC2_BASE_ADDR
arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
arm: dts: imx6ul-isiot: Add I2C nodes
imx6: isiotmx6ul: Add I2C support
arm: dts: imx6ul-isiot: Add FEC node
imx6: isiotmx6ul: Add FEC support
imx6: isiotmx6ul: Add NAND support
imx6: isiotmx6ul: Add nandboot env support
imx6ul: isiotmx6ul: Enable I2C support
i.MX6: engicam: Include dts files under MAINTAINERS
arch/arm/cpu/armv7/mx6/Kconfig | 12 ++
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6ul-isiot-mmc.dts | 50 ++++++
arch/arm/dts/imx6ul-isiot-nand.dts | 50 ++++++
arch/arm/dts/imx6ul-isiot.dtsi | 142 +++++++++++++++
board/engicam/geam6ul/MAINTAINERS | 1 +
board/engicam/icorem6/MAINTAINERS | 3 +
board/engicam/icorem6_rqs/MAINTAINERS | 3 +
board/engicam/isiotmx6ul/Kconfig | 12 ++
board/engicam/isiotmx6ul/MAINTAINERS | 10 ++
board/engicam/isiotmx6ul/Makefile | 6 +
board/engicam/isiotmx6ul/README | 28 +++
board/engicam/isiotmx6ul/isiotmx6ul.c | 315 ++++++++++++++++++++++++++++++++++
configs/imx6ul_isiot_mmc_defconfig | 41 +++++
configs/imx6ul_isiot_nand_defconfig | 42 +++++
include/configs/imx6qdl_icore.h | 2 +-
include/configs/imx6ul_geam.h | 2 +-
include/configs/imx6ul_isiot.h | 205 ++++++++++++++++++++++
18 files changed, 925 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
create mode 100644 arch/arm/dts/imx6ul-isiot-nand.dts
create mode 100644 arch/arm/dts/imx6ul-isiot.dtsi
create mode 100644 board/engicam/isiotmx6ul/Kconfig
create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS
create mode 100644 board/engicam/isiotmx6ul/Makefile
create mode 100644 board/engicam/isiotmx6ul/README
create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
create mode 100644 configs/imx6ul_isiot_mmc_defconfig
create mode 100644 configs/imx6ul_isiot_nand_defconfig
create mode 100644 include/configs/imx6ul_isiot.h
--
1.9.1
next reply other threads:[~2017-02-24 10:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-24 10:02 Jagan Teki [this message]
2017-02-24 10:02 ` [U-Boot] [PATCH v6 01/10] configs: imx6: Don't define USDHC2_BASE_ADDR Jagan Teki
2017-02-24 10:02 ` [U-Boot] [PATCH v6 02/10] arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support Jagan Teki
2017-02-24 10:02 ` [U-Boot] [PATCH v6 03/10] arm: dts: imx6ul-isiot: Add I2C nodes Jagan Teki
2017-02-24 10:02 ` [U-Boot] [PATCH v6 04/10] imx6: isiotmx6ul: Add I2C support Jagan Teki
2017-02-24 10:02 ` [U-Boot] [PATCH v6 05/10] arm: dts: imx6ul-isiot: Add FEC node Jagan Teki
2017-02-24 10:02 ` [U-Boot] [PATCH v6 06/10] imx6: isiotmx6ul: Add FEC support Jagan Teki
2017-02-24 10:02 ` [U-Boot] [PATCH v6 07/10] imx6: isiotmx6ul: Add NAND support Jagan Teki
2017-02-24 10:03 ` [U-Boot] [PATCH v6 08/10] imx6: isiotmx6ul: Add nandboot env support Jagan Teki
2017-02-24 10:03 ` [U-Boot] [PATCH v6 09/10] imx6ul: isiotmx6ul: Enable I2C support Jagan Teki
2017-02-24 10:03 ` [U-Boot] [PATCH v6 10/10] i.MX6: engicam: Include dts files under MAINTAINERS Jagan Teki
2017-02-26 11:54 ` [U-Boot] [PATCH v6 00/10] imx6ul: Add Engicam Is.IoT MX6UL support Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487930582-9951-1-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox