From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 10/15] arm: dts: imx6qdl-icore-rqs: Add eMMC node
Date: Fri, 24 Feb 2017 15:45:21 +0530 [thread overview]
Message-ID: <1487931326-10199-11-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1487931326-10199-1-git-send-email-jagan@openedev.com>
Add usdhc4 node, which is eMMC for Engicam i.CoreM6 RQS modules.
eMMC Log:
--------
icorem6qdl-rqs> mmc dev 1
switch to partitions #0, OK
mmc1(part 0) is current device
icorem6qdl-rqs> mmcinfo
Device: FSL_SDHC
Manufacturer ID: fe
OEM: 14e
Name: MMC04
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.4.1
High Capacity: Yes
Capacity: 3.5 GiB
Bus Width: 4-bit
Erase Group Size: 512 KiB
HC WP Group Size: 4 MiB
User Capacity: 3.5 GiB
Boot Capacity: 16 MiB ENH
RPMB Capacity: 128 KiB ENH
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 750229b..8b9d5b4 100644
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -107,6 +107,13 @@
status = "okay";
};
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ no-1-8-v;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_enet: enetgrp {
fsl,pins = <
@@ -167,4 +174,19 @@
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
>;
};
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17070
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10070
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+ >;
+ };
};
--
1.9.1
next prev parent reply other threads:[~2017-02-24 10:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-24 10:15 [U-Boot] [PATCH v4 00/15] i.MX6: Engicam i.CoreM6/Is.IoT eMMC boot support Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 01/15] imx6: Add imx6_src_get_boot_mode Jagan Teki
2017-02-26 11:31 ` Stefano Babic
2017-02-24 10:15 ` [U-Boot] [PATCH v4 02/15] imx: spl: Update NAND bootmode detection bit Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 03/15] imx: Use IMX6_BMODE_* macros instead of numericals Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 04/15] imx6: Add src_base structure define macro Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 05/15] imx6: isiotmx6ul: Update SPL board boot order for eMMC Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 06/15] i.MX6UL: isiot: Add eMMC boot support Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 07/15] i.MX6UL: isiot: Add modeboot env via board_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 08/15] i.MX6UL: isiot: Add mmc_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 09/15] i.MX6UL: isiot: Switch the mmc env based on devno Jagan Teki
2017-02-24 10:15 ` Jagan Teki [this message]
2017-02-24 10:15 ` [U-Boot] [PATCH v4 11/15] imx6: icorem6_rqs: Update SPL board boot order for eMMC Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 12/15] imx6: icorem6_rqs: Add eMMC boot support Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 13/15] i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 14/15] i.MX6Q: icorem6_rqs: Add mmc_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 15/15] i.MX6Q: isiot: Switch the mmc env based on devno Jagan Teki
2017-02-26 11:54 ` [U-Boot] [PATCH v4 00/15] i.MX6: Engicam i.CoreM6/Is.IoT eMMC boot support Stefano Babic
2017-02-27 14:28 ` Sébastien Szymanski
2017-02-27 14:38 ` Jagan Teki
2017-02-27 14:52 ` Sébastien Szymanski
2017-02-27 15:07 ` Jagan Teki
2017-02-27 14:41 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487931326-10199-11-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox