From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 02/15] imx: spl: Update NAND bootmode detection bit
Date: Fri, 24 Feb 2017 15:45:13 +0530 [thread overview]
Message-ID: <1487931326-10199-3-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1487931326-10199-1-git-send-email-jagan@openedev.com>
BOOT_CFG1[7:4] the NAND boot mode selection is done
only when BOOT_CFG1[7] is 1 hence update the NAND
boot mode detection bit case. This information available
on Table 8-11. NAND Boot eFUSE Descriptions, from IMX6DQRM.
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@openedev.com>
---
arch/arm/imx-common/spl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
index 6c20f28..81fc0ca 100644
--- a/arch/arm/imx-common/spl.c
+++ b/arch/arm/imx-common/spl.c
@@ -63,8 +63,8 @@ u32 spl_boot_device(void)
case 0x6:
case 0x7:
return BOOT_DEVICE_MMC1;
- /* NAND Flash: 8.5.2 */
- case 0x8 ... 0xf:
+ /* NAND Flash: 8.5.2, Table 8-10 */
+ case 0x8:
return BOOT_DEVICE_NAND;
}
return BOOT_DEVICE_NONE;
--
1.9.1
next prev parent reply other threads:[~2017-02-24 10:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-24 10:15 [U-Boot] [PATCH v4 00/15] i.MX6: Engicam i.CoreM6/Is.IoT eMMC boot support Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 01/15] imx6: Add imx6_src_get_boot_mode Jagan Teki
2017-02-26 11:31 ` Stefano Babic
2017-02-24 10:15 ` Jagan Teki [this message]
2017-02-24 10:15 ` [U-Boot] [PATCH v4 03/15] imx: Use IMX6_BMODE_* macros instead of numericals Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 04/15] imx6: Add src_base structure define macro Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 05/15] imx6: isiotmx6ul: Update SPL board boot order for eMMC Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 06/15] i.MX6UL: isiot: Add eMMC boot support Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 07/15] i.MX6UL: isiot: Add modeboot env via board_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 08/15] i.MX6UL: isiot: Add mmc_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 09/15] i.MX6UL: isiot: Switch the mmc env based on devno Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 10/15] arm: dts: imx6qdl-icore-rqs: Add eMMC node Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 11/15] imx6: icorem6_rqs: Update SPL board boot order for eMMC Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 12/15] imx6: icorem6_rqs: Add eMMC boot support Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 13/15] i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 14/15] i.MX6Q: icorem6_rqs: Add mmc_late_init Jagan Teki
2017-02-24 10:15 ` [U-Boot] [PATCH v4 15/15] i.MX6Q: isiot: Switch the mmc env based on devno Jagan Teki
2017-02-26 11:54 ` [U-Boot] [PATCH v4 00/15] i.MX6: Engicam i.CoreM6/Is.IoT eMMC boot support Stefano Babic
2017-02-27 14:28 ` Sébastien Szymanski
2017-02-27 14:38 ` Jagan Teki
2017-02-27 14:52 ` Sébastien Szymanski
2017-02-27 15:07 ` Jagan Teki
2017-02-27 14:41 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487931326-10199-3-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox