From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 08/31] ARM: i.MX6: sabresd: Move CONFIG_SYS_I2C_MXC to defconfigs
Date: Thu, 6 Apr 2017 00:50:18 +0530 [thread overview]
Message-ID: <1491420041-12471-9-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491420041-12471-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Moved CONFIG_SYS_I2C_MXC from include/configs/mxsabresd.h
to imx6 sabresd defconfigs.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
configs/imx6q_sabresd_defconfig | 1 +
configs/imx6qp_sabresd_defconfig | 1 +
configs/mx6dlsabresd_defconfig | 1 +
configs/mx6qsabresd_defconfig | 1 +
configs/mx6sabresd_spl_defconfig | 1 +
include/configs/mx6sabresd.h | 3 ++-
6 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/configs/imx6q_sabresd_defconfig b/configs/imx6q_sabresd_defconfig
index c6d4462..e1bea93 100644
--- a/configs/imx6q_sabresd_defconfig
+++ b/configs/imx6q_sabresd_defconfig
@@ -54,5 +54,6 @@ CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
+CONFIG_SYS_I2C_MXC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/imx6qp_sabresd_defconfig b/configs/imx6qp_sabresd_defconfig
index 430c34b..0d51c2b 100644
--- a/configs/imx6qp_sabresd_defconfig
+++ b/configs/imx6qp_sabresd_defconfig
@@ -55,5 +55,6 @@ CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
+CONFIG_SYS_I2C_MXC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig
index 0254a53..56f629f 100644
--- a/configs/mx6dlsabresd_defconfig
+++ b/configs/mx6dlsabresd_defconfig
@@ -42,3 +42,4 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+CONFIG_SYS_I2C_MXC=y
diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig
index cef7f1a..e598dc8 100644
--- a/configs/mx6qsabresd_defconfig
+++ b/configs/mx6qsabresd_defconfig
@@ -42,3 +42,4 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+CONFIG_SYS_I2C_MXC=y
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index c89c3c6..d52e48f 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -48,3 +48,4 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+CONFIG_SYS_I2C_MXC=y
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 9885a5c..7c0e7a5 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -52,12 +52,13 @@
#endif
/* I2C Configs */
+#ifdef CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
+#endif
/* PMIC */
#define CONFIG_POWER
--
1.9.1
next prev parent reply other threads:[~2017-04-05 19:20 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 19:20 [U-Boot] [PATCH v3 00/31] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 01/31] ARM: i.MX6: sabresd: Fix README - s/of=/dev/sdbbs=1K/of=/dev/sdb bs=1K/ Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 02/31] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 03/31] ARM: dts: imx6qdl-sabresd: Add imx6q-sabresd.dts Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 04/31] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 05/31] ARM: i.MX6Q: sabresd: Add initial devicetree support Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 06/31] ARM: dts: imx6qdl-sabresd: Add imx6qp-sabresd.dts Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 07/31] ARM: i.MX6QP: sabresd: Add initial devicetree support Jagan Teki
2017-04-05 19:20 ` Jagan Teki [this message]
2017-04-05 19:20 ` [U-Boot] [PATCH v3 09/31] ARM: dts: imx6qdl-sabresd: Add I2C node's Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 10/31] ARM: dts: imx6qdl-sabresd: Add PMIC pfuze100 node Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 11/31] ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 12/31] ARM: i.MX6: sabresd: defconfig move - CONFIG_USB_EHCI(_MX6) Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 13/31] ARM: dts: imx6qdl-sabresd: Add usb host node Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 14/31] ARM: dts: imx6qdl-sabresd: Add usb otg node Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 15/31] ARM: i.MX6: sabresd: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 16/31] ARM: i.MX6: sabresd: Enable DM_USB Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 17/31] ARM: dts: imx6qdl-sabresd: Add FEC node Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 18/31] ARM: i.MX6: sabresd: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 19/31] ARM: i.MX6: sabresd: Enable DM_ETH Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 20/31] ARM: i.MX6: sabresd: Add dm_gpio_* for backlight Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 21/31] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_power Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 22/31] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_reset Jagan Teki
2017-04-06 21:56 ` Fabio Estevam
2017-04-07 6:42 ` Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 23/31] ARM: i.MX6DL: sabresd: Move DCD reginit on SPL Jagan Teki
2017-04-06 21:54 ` Fabio Estevam
2017-04-07 6:10 ` Jagan Teki
2017-05-12 4:03 ` Fabio Estevam
2017-04-05 19:20 ` [U-Boot] [PATCH v3 24/31] ARM: dts: imx6qdl-sabresd: Add imx6dl-sabresd.dts Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 25/31] ARM: i.MX6DL: sabresd: Add initial devicetree support Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 26/31] ARM: i.MX6: sabresd: Drop legacy non-fdt code Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 27/31] ARM: i.MX6: %s/mx6sabresd/imx6sabresd Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 28/31] ARM: i.MX6: sabresd: Move DM_* and OF_CONTROL to arch Kconfig Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 29/31] ARM: i.MX6: sabresd: Update README Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 30/31] ARM: i.MX6: sabresd: Drop checkboard Jagan Teki
2017-04-05 19:20 ` [U-Boot] [PATCH v3 31/31] ARM: i.MX6: sabresd: Cleanup board code Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491420041-12471-9-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox