From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 25/35] ARM: i.MX6DL: sabresd: Add initial devicetree support
Date: Sun, 9 Apr 2017 12:22:46 +0530 [thread overview]
Message-ID: <1491720776-7445-26-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491720776-7445-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add initial devicetree support for i.MX6 DualLite Sabresd board.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- Newly added
board/freescale/mx6sabresd/MAINTAINERS | 1 +
configs/imx6dl_sabresd_spl_defconfig | 68 ++++++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 configs/imx6dl_sabresd_spl_defconfig
diff --git a/board/freescale/mx6sabresd/MAINTAINERS b/board/freescale/mx6sabresd/MAINTAINERS
index d458b6a..0252544 100644
--- a/board/freescale/mx6sabresd/MAINTAINERS
+++ b/board/freescale/mx6sabresd/MAINTAINERS
@@ -6,5 +6,6 @@ F: include/configs/mx6sabresd.h
F: configs/mx6dlsabresd_defconfig
F: configs/mx6qsabresd_defconfig
F: configs/mx6sabresd_spl_defconfig
+F: configs/imx6dl_sabresd_spl_defconfig
F: configs/imx6q_sabresd_spl_defconfig
F: configs/imx6qp_sabresd_spl_defconfig
diff --git a/configs/imx6dl_sabresd_spl_defconfig b/configs/imx6dl_sabresd_spl_defconfig
new file mode 100644
index 0000000..20dc1e0
--- /dev/null
+++ b/configs/imx6dl_sabresd_spl_defconfig
@@ -0,0 +1,68 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-sabresd"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
+CONFIG_BOOTDELAY=3
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SPL=y
+CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PCI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MX6=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="FSL"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_ETH=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_USB=y
+# CONFIG_BLK is not set
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
--
1.9.1
next prev parent reply other threads:[~2017-04-09 6:52 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-09 6:52 [U-Boot] [PATCH v4 00/35] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 01/35] ARM: i.MX6: sabresd: Fix README - s/of=/dev/sdbbs=1K/of=/dev/sdb bs=1K/ Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 02/35] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 03/35] ARM: dts: imx6qdl-sabresd: Add imx6q-sabresd.dts Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 04/35] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 05/35] ARM: i.MX6Q: sabresd: Add initial devicetree support Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 06/35] ARM: dts: imx6qdl-sabresd: Add imx6qp-sabresd.dts Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 07/35] ARM: i.MX6QP: sabresd: Add initial devicetree support Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 08/35] ARM: i.MX6: sabresd: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 09/35] ARM: dts: imx6qdl-sabresd: Add I2C node's Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 10/35] ARM: dts: imx6qdl-sabresd: Add PMIC pfuze100 node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 11/35] ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 12/35] ARM: i.MX6: sabresd: defconfig move - CONFIG_USB_EHCI(_MX6) Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 13/35] ARM: dts: imx6qdl-sabresd: Add usb host node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 14/35] ARM: dts: imx6qdl-sabresd: Add usb otg node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 15/35] ARM: i.MX6: sabresd: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 16/35] ARM: i.MX6: sabresd: Enable DM_USB Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 17/35] ARM: dts: imx6qdl-sabresd: Add FEC node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 18/35] ARM: i.MX6: sabre: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 19/35] ARM: i.MX6: sabresd: Enable DM_ETH Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 20/35] ARM: i.MX6: sabresd: Add dm_gpio_* for backlight Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 21/35] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_power Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 22/35] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_reset Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 23/35] ARM: i.MX6DL: sabresd: Move DCD reginit on SPL Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 24/35] ARM: dts: imx6qdl-sabresd: Add imx6dl-sabresd.dts Jagan Teki
2017-04-09 6:52 ` Jagan Teki [this message]
2017-04-09 6:52 ` [U-Boot] [PATCH v4 26/35] ARM: i.MX6: %s/mx6[dl|q]sabresd_defconfig/imx6[dl|q]_sabresd_defconfig Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 27/35] ARM: i.MX6Q: sabresd: Add dts support for imx6q_sabresd Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 28/35] ARM: i.MX6DL: sabresd: Add dts support for imx6dl_sabresd Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 29/35] ARM: i.MX6: sabresd: Drop legacy non-fdt code Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 30/35] ARM: i.MX6: %s/mx6sabresd/imx6sabresd Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 31/35] ARM: i.MX6: %s/MX6SABRESD/IMX6SABRESD Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 32/35] ARM: i.MX6: sabresd: Move DM_* and OF_CONTROL to arch Kconfig Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 33/35] ARM: i.MX6: sabresd: Update README Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 34/35] ARM: i.MX6: sabresd: Drop checkboard Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 35/35] ARM: i.MX6: sabresd: Cleanup board code Jagan Teki
2017-04-09 12:47 ` [U-Boot] [PATCH v4 00/35] ARM: i.MX6: SabreSD: Add dts support Fabio Estevam
2017-04-09 19:12 ` Jagan Teki
2017-04-09 23:13 ` Fabio Estevam
2017-04-17 13:28 ` Jagan Teki
2017-04-25 18:35 ` Jagan Teki
2017-04-25 19:27 ` Fabio Estevam
2017-05-03 6:53 ` Jagan Teki
2017-05-03 11:50 ` Tom Rini
2017-04-28 20:07 ` Fabio Estevam
2017-05-03 6:55 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491720776-7445-26-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox