From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 06/35] ARM: dts: imx6qdl-sabresd: Add imx6qp-sabresd.dts
Date: Sun, 9 Apr 2017 12:22:27 +0530 [thread overview]
Message-ID: <1491720776-7445-7-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491720776-7445-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add initial dts support for i.MX6 Quad Plus Sabresd board.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4, v3, v2:
- none
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6qdl-sabresd.dtsi | 96 ++++++++++++++++++++-------------------
arch/arm/dts/imx6qp-sabresd.dts | 85 ++++++++++++++++++++++++++++++++++
3 files changed, 135 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 18b1ee6..b6042f3 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -318,6 +318,7 @@ dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
imx6q-icore.dtb \
imx6q-icore-rqs.dtb \
imx6q-sabresd.dtb \
+ imx6qp-sabresd.dtb \
imx6sx-sabreauto.dtb \
imx6ul-geam-kit.dtb \
imx6ul-isiot-emmc.dtb \
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index 1846274..2986cb4 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -56,56 +56,58 @@
};
&iomuxc {
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
+ imx6qdl-sabresd {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
- MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
- MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
- MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
- >;
- };
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
- MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
- MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
- MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
- MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
- >;
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
};
};
diff --git a/arch/arm/dts/imx6qp-sabresd.dts b/arch/arm/dts/imx6qp-sabresd.dts
new file mode 100644
index 0000000..b882aee
--- /dev/null
+++ b/arch/arm/dts/imx6qp-sabresd.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+ compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&iomuxc {
+ imx6qdl-sabresd {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2017-04-09 6:52 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-09 6:52 [U-Boot] [PATCH v4 00/35] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 01/35] ARM: i.MX6: sabresd: Fix README - s/of=/dev/sdbbs=1K/of=/dev/sdb bs=1K/ Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 02/35] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 03/35] ARM: dts: imx6qdl-sabresd: Add imx6q-sabresd.dts Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 04/35] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 05/35] ARM: i.MX6Q: sabresd: Add initial devicetree support Jagan Teki
2017-04-09 6:52 ` Jagan Teki [this message]
2017-04-09 6:52 ` [U-Boot] [PATCH v4 07/35] ARM: i.MX6QP: " Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 08/35] ARM: i.MX6: sabresd: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 09/35] ARM: dts: imx6qdl-sabresd: Add I2C node's Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 10/35] ARM: dts: imx6qdl-sabresd: Add PMIC pfuze100 node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 11/35] ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 12/35] ARM: i.MX6: sabresd: defconfig move - CONFIG_USB_EHCI(_MX6) Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 13/35] ARM: dts: imx6qdl-sabresd: Add usb host node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 14/35] ARM: dts: imx6qdl-sabresd: Add usb otg node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 15/35] ARM: i.MX6: sabresd: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 16/35] ARM: i.MX6: sabresd: Enable DM_USB Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 17/35] ARM: dts: imx6qdl-sabresd: Add FEC node Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 18/35] ARM: i.MX6: sabre: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 19/35] ARM: i.MX6: sabresd: Enable DM_ETH Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 20/35] ARM: i.MX6: sabresd: Add dm_gpio_* for backlight Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 21/35] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_power Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 22/35] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_reset Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 23/35] ARM: i.MX6DL: sabresd: Move DCD reginit on SPL Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 24/35] ARM: dts: imx6qdl-sabresd: Add imx6dl-sabresd.dts Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 25/35] ARM: i.MX6DL: sabresd: Add initial devicetree support Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 26/35] ARM: i.MX6: %s/mx6[dl|q]sabresd_defconfig/imx6[dl|q]_sabresd_defconfig Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 27/35] ARM: i.MX6Q: sabresd: Add dts support for imx6q_sabresd Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 28/35] ARM: i.MX6DL: sabresd: Add dts support for imx6dl_sabresd Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 29/35] ARM: i.MX6: sabresd: Drop legacy non-fdt code Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 30/35] ARM: i.MX6: %s/mx6sabresd/imx6sabresd Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 31/35] ARM: i.MX6: %s/MX6SABRESD/IMX6SABRESD Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 32/35] ARM: i.MX6: sabresd: Move DM_* and OF_CONTROL to arch Kconfig Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 33/35] ARM: i.MX6: sabresd: Update README Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 34/35] ARM: i.MX6: sabresd: Drop checkboard Jagan Teki
2017-04-09 6:52 ` [U-Boot] [PATCH v4 35/35] ARM: i.MX6: sabresd: Cleanup board code Jagan Teki
2017-04-09 12:47 ` [U-Boot] [PATCH v4 00/35] ARM: i.MX6: SabreSD: Add dts support Fabio Estevam
2017-04-09 19:12 ` Jagan Teki
2017-04-09 23:13 ` Fabio Estevam
2017-04-17 13:28 ` Jagan Teki
2017-04-25 18:35 ` Jagan Teki
2017-04-25 19:27 ` Fabio Estevam
2017-05-03 6:53 ` Jagan Teki
2017-05-03 11:50 ` Tom Rini
2017-04-28 20:07 ` Fabio Estevam
2017-05-03 6:55 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491720776-7445-7-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox