From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 11/14] MIPS: add support for Broadcom MIPS BCM6328 SoC family
Date: Thu, 20 Apr 2017 21:12:22 +0200 [thread overview]
Message-ID: <1492715545-3010-12-git-send-email-noltari@gmail.com> (raw)
In-Reply-To: <1492715545-3010-1-git-send-email-noltari@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v4: No changes.
v3: No changes.
v2: Introduce changes suggested by Daniel Schwierzeck:
- Split BMIPS support patches.
- Add PERF_BASE to cpus.
arch/mips/dts/brcm,bcm6328.dtsi | 88 +++++++++++++++++++++++++++++++++++++++++
arch/mips/mach-bmips/Kconfig | 12 ++++++
include/configs/bmips_bcm6328.h | 25 ++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 arch/mips/dts/brcm,bcm6328.dtsi
create mode 100644 include/configs/bmips_bcm6328.h
diff --git a/arch/mips/dts/brcm,bcm6328.dtsi b/arch/mips/dts/brcm,bcm6328.dtsi
new file mode 100644
index 0000000..707e755
--- /dev/null
+++ b/arch/mips/dts/brcm,bcm6328.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm6328";
+
+ cpus {
+ reg = <0x10000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ cpu at 0 {
+ compatible = "brcm,bcm6328-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+
+ cpu at 1 {
+ compatible = "brcm,bcm6328-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <1>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ periph_osc: periph-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ ubus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ reset_cntl: syscon at 10000068 {
+ compatible = "syscon";
+ reg = <0x10000068 0x4>;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&reset_cntl>;
+ offset = <0>;
+ mask = <0x1>;
+ };
+
+ uart0: serial at 10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ uart1: serial at 10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ memory-controller at 10003000 {
+ compatible = "brcm,bcm6328-mc";
+ reg = <0x10003000 0x1000>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index 2867ad8..4c74cee 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -2,11 +2,23 @@ menu "Broadcom MIPS platforms"
depends on ARCH_BMIPS
config SYS_SOC
+ default "bcm6328" if SOC_BMIPS_BCM6328
default "bcm6358" if SOC_BMIPS_BCM6358
choice
prompt "Broadcom MIPS SoC select"
+config SOC_BMIPS_BCM6328
+ bool "BMIPS BCM6328 family"
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select MIPS_TUNE_4KC
+ select MIPS_L1_CACHE_SHIFT_4
+ select SWAP_IO_SPACE
+ select SYSRESET_SYSCON
+ help
+ This supports BMIPS BCM6328 family including BCM63281 and BCM63283.
+
config SOC_BMIPS_BCM6358
bool "BMIPS BCM6358 family"
select SUPPORTS_BIG_ENDIAN
diff --git a/include/configs/bmips_bcm6328.h b/include/configs/bmips_bcm6328.h
new file mode 100644
index 0000000..a5c9a2e
--- /dev/null
+++ b/include/configs/bmips_bcm6328.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_BMIPS_BCM6328_H
+#define __CONFIG_BMIPS_BCM6328_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 160000000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+
+/* U-Boot */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#if defined(CONFIG_BMIPS_BOOT_RAM)
+#define CONFIG_SYS_INIT_SP_OFFSET 0x2000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+#endif /* __CONFIG_BMIPS_BCM6328_H */
--
2.1.4
next prev parent reply other threads:[~2017-04-20 19:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-20 19:12 [U-Boot] [PATCH v4 00/14] Add support for Broadcom MIPS SoCs Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 01/14] cmd: cpu: fix NULL cpu feature prints Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 02/14] sysreset: add syscon-reboot driver Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 03/14] MIPS: allow using generic sysreset drivers Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 04/14] serial: add serial driver for BCM6345 Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 05/14] cmd: cpu: refactor to ensure devices are probed and improve code style Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 06/14] cpu: add CPU driver for Broadcom MIPS SoCs Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 07/14] ram: add RAM " Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 08/14] MIPS: add initial infrastructure " Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 09/14] MIPS: add support for Broadcom MIPS BCM6358 SoC family Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 10/14] MIPS: add BMIPS Huawei HG556a board Álvaro Fernández Rojas
2017-04-20 19:12 ` Álvaro Fernández Rojas [this message]
2017-04-20 19:12 ` [U-Boot] [PATCH v4 12/14] MIPS: add BMIPS Comtrend AR-5387un board Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 13/14] MIPS: add support for Broadcom MIPS BCM63268 SoC family Álvaro Fernández Rojas
2017-04-20 19:12 ` [U-Boot] [PATCH v4 14/14] MIPS: add BMIPS Comtrend VR-3032u board Álvaro Fernández Rojas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492715545-3010-12-git-send-email-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox