From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Wed, 3 May 2017 15:08:27 +0200 Subject: [U-Boot] [PATCH 5/5] mips: bmips: add Comtrend VR-3032u bcm6328-leds In-Reply-To: <1493816907-30486-1-git-send-email-noltari@gmail.com> References: <1493816907-30486-1-git-send-email-noltari@gmail.com> Message-ID: <1493816907-30486-6-git-send-email-noltari@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de This board has several LEDs attached to its BCM6328 led controller. Signed-off-by: Álvaro Fernández Rojas --- arch/mips/dts/comtrend,vr-3032u.dts | 43 ++++++++++++++++++++++++++++++++++ configs/comtrend_vr3032u_ram_defconfig | 4 ++++ 2 files changed, 47 insertions(+) diff --git a/arch/mips/dts/comtrend,vr-3032u.dts b/arch/mips/dts/comtrend,vr-3032u.dts index 6715304..54e738c 100644 --- a/arch/mips/dts/comtrend,vr-3032u.dts +++ b/arch/mips/dts/comtrend,vr-3032u.dts @@ -21,6 +21,49 @@ }; }; +&leds { + status = "okay"; + brcm,serial-leds; + brcm,serial-dat-low; + brcm,serial-shift-inv; + + led at 2 { + reg = <2>; + active-low; + label = "VR-3032u:red:inet"; + }; + + led at 3 { + reg = <3>; + active-low; + label = "VR-3032u:green:dsl"; + }; + + led at 4 { + reg = <4>; + active-low; + label = "VR-3032u:green:usb"; + }; + + led at 7 { + reg = <7>; + active-low; + label = "VR-3032u:green:wps"; + }; + + led at 8 { + reg = <8>; + active-low; + label = "VR-3032u:green:inet"; + }; + + led at 20 { + reg = <20>; + active-low; + label = "VR-3032u:green:power"; + }; +}; + &uart0 { u-boot,dm-pre-reloc; status = "okay"; diff --git a/configs/comtrend_vr3032u_ram_defconfig b/configs/comtrend_vr3032u_ram_defconfig index c62ef0c..a04b0e5 100644 --- a/configs/comtrend_vr3032u_ram_defconfig +++ b/configs/comtrend_vr3032u_ram_defconfig @@ -16,6 +16,7 @@ CONFIG_CMD_CPU=y # CONFIG_CMD_GPIO is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_IMPORTENV is not set +CONFIG_CMD_LED=y CONFIG_CMD_LICENSE=y CONFIG_CMD_LOADB=y # CONFIG_CMD_LOADS is not set @@ -31,6 +32,9 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y CONFIG_HUSH_PARSER=y +CONFIG_LED=y +CONFIG_LED_BCM6328=y +CONFIG_LED_BLINK=y CONFIG_MIPS=y # CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set # CONFIG_MIPS_BOOT_ENV_LEGACY is not set -- 2.1.4