From: Vikas Manocha <vikas.manocha@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] armv7m: add MPU configuration support
Date: Wed, 3 May 2017 16:38:55 -0700 [thread overview]
Message-ID: <1493854737-4961-3-git-send-email-vikas.manocha@st.com> (raw)
In-Reply-To: <1493854737-4961-1-git-send-email-vikas.manocha@st.com>
Cortex-M archs support option memory protection unit (MPU). MPU is used
to set the memory types, attributes, access permissions for different regions,
cache policies of the device.
e.g. using MPU it is possible to configure memory region as device memory
or strongly ordered, memory attributes like execute never, cache policies
like write-back or write-through.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
---
arch/arm/cpu/armv7m/Makefile | 2 +-
arch/arm/cpu/armv7m/mpu.c | 82 +++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/armv7m.h | 20 ----------
arch/arm/include/asm/armv7m_mpu.h | 67 ++++++++++++++++++++++++++++++++
4 files changed, 150 insertions(+), 21 deletions(-)
create mode 100644 arch/arm/cpu/armv7m/mpu.c
create mode 100644 arch/arm/include/asm/armv7m_mpu.h
diff --git a/arch/arm/cpu/armv7m/Makefile b/arch/arm/cpu/armv7m/Makefile
index 93c9085..257fc7f 100644
--- a/arch/arm/cpu/armv7m/Makefile
+++ b/arch/arm/cpu/armv7m/Makefile
@@ -6,5 +6,5 @@
#
extra-y := start.o
-obj-y += cpu.o cache.o
+obj-y += cpu.o cache.o mpu.o
obj-$(CONFIG_SYS_ARCH_TIMER) += systick-timer.o
diff --git a/arch/arm/cpu/armv7m/mpu.c b/arch/arm/cpu/armv7m/mpu.c
new file mode 100644
index 0000000..31a243b
--- /dev/null
+++ b/arch/arm/cpu/armv7m/mpu.c
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2017
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha at st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/bitops.h>
+#include <asm/armv7m.h>
+#include <asm/armv7m_mpu.h>
+#include <asm/io.h>
+
+#define V7M_MPU_CTRL_ENABLE (1 << 0)
+#define V7M_MPU_CTRL_DISABLE (0 << 0)
+#define V7M_MPU_CTRL_HFNMIENA (1 << 1)
+#define VALID_REGION (1 << 4)
+
+#define ENABLE_REGION (1 << 0)
+
+#define AP_SHIFT 24
+#define XN_SHIFT 28
+#define TEX_SHIFT 19
+#define S_SHIFT 18
+#define C_SHIFT 17
+#define B_SHIFT 16
+#define REGION_SIZE_SHIFT 1
+
+#define CACHEABLE (1 << C_SHIFT)
+#define BUFFERABLE (1 << B_SHIFT)
+#define SHAREABLE (1 << S_SHIFT)
+
+void disable_mpu(void)
+{
+ writel(0, &V7M_MPU->ctrl);
+}
+
+void enable_mpu(void)
+{
+ writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl);
+
+ /* Make sure new mpu config is effective for next memory access */
+ dsb();
+ isb(); /* Make sure instruction stream sees it */
+}
+
+void mpu_config(struct mpu_region_config *reg_config)
+{
+ uint32_t attr;
+
+ switch (reg_config->mr_attr) {
+ case STRONG_ORDER:
+ attr = SHAREABLE;
+ break;
+ case SHARED_WRITE_BUFFERED:
+ attr = BUFFERABLE;
+ break;
+ case O_I_WT_NO_WR_ALLOC:
+ attr = CACHEABLE;
+ break;
+ case O_I_WB_NO_WR_ALLOC:
+ attr = CACHEABLE | BUFFERABLE;
+ break;
+ case O_I_NON_CACHEABLE:
+ attr = 1 << TEX_SHIFT;
+ break;
+ case O_I_WB_RD_WR_ALLOC:
+ attr = (1 << TEX_SHIFT) | CACHEABLE | BUFFERABLE;
+ break;
+ case DEVICE_NON_SHARED:
+ attr = (2 << TEX_SHIFT) | BUFFERABLE;
+ default:
+ attr = 0; /* strongly ordered */
+ break;
+ };
+
+ writel(reg_config->start_addr | VALID_REGION | reg_config->region_no,
+ &V7M_MPU->rbar);
+
+ writel(reg_config->xn << XN_SHIFT | reg_config->ap << AP_SHIFT | attr
+ | reg_config->reg_size << REGION_SIZE_SHIFT | ENABLE_REGION
+ , &V7M_MPU->rasr);
+}
diff --git a/arch/arm/include/asm/armv7m.h b/arch/arm/include/asm/armv7m.h
index 9a6224f..af8a97e 100644
--- a/arch/arm/include/asm/armv7m.h
+++ b/arch/arm/include/asm/armv7m.h
@@ -70,25 +70,5 @@ struct v7m_mpu {
};
#define V7M_MPU ((struct v7m_mpu *)V7M_MPU_BASE)
-#define V7M_MPU_CTRL_ENABLE (1 << 0)
-#define V7M_MPU_CTRL_HFNMIENA (1 << 1)
-
-#define V7M_MPU_CTRL_ENABLE (1 << 0)
-#define V7M_MPU_CTRL_DISABLE (0 << 0)
-#define V7M_MPU_CTRL_HFNMIENA (1 << 1)
-
-#define V7M_MPU_RASR_EN (1 << 0)
-#define V7M_MPU_RASR_SIZE_BITS 1
-#define V7M_MPU_RASR_SIZE_4GB (31 << V7M_MPU_RASR_SIZE_BITS)
-#define V7M_MPU_RASR_SIZE_8MB (22 << V7M_MPU_RASR_SIZE_BITS)
-
-#define V7M_MPU_RASR_TEX_SHIFT 19
-#define V7M_MPU_RASR_S_SHIFT 18
-#define V7M_MPU_RASR_C_SHIFT 17
-#define V7M_MPU_RASR_B_SHIFT 16
-#define V7M_MPU_RASR_AP_RW_RW (3 << 24)
-#define V7M_MPU_RASR_XN_ENABLE (0 << 28)
-#define V7M_MPU_RASR_XN_DISABLE (1 << 28)
-
#endif /* !defined(__ASSEMBLY__) */
#endif /* ARMV7M_H */
diff --git a/arch/arm/include/asm/armv7m_mpu.h b/arch/arm/include/asm/armv7m_mpu.h
new file mode 100644
index 0000000..d7e99b4
--- /dev/null
+++ b/arch/arm/include/asm/armv7m_mpu.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2017
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+enum region_number {
+ REGION_0 = 0,
+ REGION_1,
+ REGION_2,
+ REGION_3,
+ REGION_4,
+ REGION_5,
+ REGION_6,
+ REGION_7,
+};
+
+enum ap {
+ NO_ACCESS = 0,
+ PRIV_RW_USR_NO,
+ PRIV_RW_USR_RO,
+ PRIV_RW_USR_RW,
+ UNPREDICTABLE,
+ PRIV_RO_USR_NO,
+ PRIV_RO_USR_RO,
+};
+
+enum mr_attr {
+ STRONG_ORDER = 0,
+ SHARED_WRITE_BUFFERED,
+ O_I_WT_NO_WR_ALLOC,
+ O_I_WB_NO_WR_ALLOC,
+ O_I_NON_CACHEABLE,
+ O_I_WB_RD_WR_ALLOC,
+ DEVICE_NON_SHARED,
+};
+enum size {
+ REGION_8MB = 22,
+ REGION_16MB,
+ REGION_32MB,
+ REGION_64MB,
+ REGION_128MB,
+ REGION_256MB,
+ REGION_512MB,
+ REGION_1GB,
+ REGION_2GB,
+ REGION_4GB,
+};
+
+enum xn {
+ XN_DIS = 0,
+ XN_EN,
+};
+
+struct mpu_region_config {
+ uint32_t start_addr;
+ enum region_number region_no;
+ enum xn xn;
+ enum ap ap;
+ enum mr_attr mr_attr;
+ enum size reg_size;
+};
+
+void disable_mpu(void);
+void enable_mpu(void);
+void mpu_config(struct mpu_region_config *reg_config);
--
1.9.1
next prev parent reply other threads:[~2017-05-03 23:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-03 23:38 [U-Boot] [PATCH 0/4] armv7m: add memory protection unit support Vikas Manocha
2017-05-03 23:38 ` [U-Boot] [PATCH 1/4] armv7m: correct mpu region size define for 8MB size Vikas Manocha
2017-05-12 17:20 ` [U-Boot] [U-Boot, " Tom Rini
2017-05-03 23:38 ` Vikas Manocha [this message]
2017-05-12 17:20 ` [U-Boot] [U-Boot,2/4] armv7m: add MPU configuration support Tom Rini
2017-05-03 23:38 ` [U-Boot] [PATCH 3/4] stm32: use armv7m " Vikas Manocha
2017-05-12 17:20 ` [U-Boot] [U-Boot, " Tom Rini
2017-05-03 23:38 ` [U-Boot] [PATCH 4/4] stm32f7: configure mpu valid for f7 family Vikas Manocha
2017-05-12 17:20 ` [U-Boot] [U-Boot, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493854737-4961-3-git-send-email-vikas.manocha@st.com \
--to=vikas.manocha@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox