From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/5] x86: congatec: add secureboot enabled defconfig for conga-qeval20-qa3-e3845
Date: Thu, 11 May 2017 17:14:52 +0200 [thread overview]
Message-ID: <1494515696-2087-2-git-send-email-agust@denx.de> (raw)
In-Reply-To: <1494515696-2087-1-git-send-email-agust@denx.de>
From: Markus Valentin <mv@denx.de>
Signed-off-by: Markus Valentin <mv@denx.de>
[agust: rebased, fixed to build with v2017.05]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
...0-qa3-e3845-internal-uart-secure-boot_defconfig | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 configs/conga-qeval20-qa3-e3845-internal-uart-secure-boot_defconfig
diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart-secure-boot_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart-secure-boot_defconfig
new file mode 100644
index 0000000..b78f90e
--- /dev/null
+++ b/configs/conga-qeval20-qa3-e3845-internal-uart-secure-boot_defconfig
@@ -0,0 +1,77 @@
+CONFIG_X86=y
+CONFIG_VENDOR_CONGATEC=y
+CONFIG_TARGET_CONGA_QEVAL20_QA3_E3845=y
+CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
+CONFIG_INTERNAL_UART=y
+CONFIG_HAVE_INTEL_ME=y
+CONFIG_BAYTRAIL_SECURE_BOOT=y
+CONFIG_ENABLE_MRC_CACHE=y
+CONFIG_SMP=y
+CONFIG_HAVE_VGA_BIOS=y
+CONFIG_VGA_BIOS_ADDR=0xfffa0000
+CONFIG_GENERATE_PIRQ_TABLE=y
+CONFIG_GENERATE_MP_TABLE=y
+CONFIG_GENERATE_ACPI_TABLE=y
+CONFIG_SEABIOS=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_BOOTSTAGE=y
+CONFIG_BOOTSTAGE_REPORT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_BOOTSTAGE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CPU=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_INTEL=y
+CONFIG_WINBOND_W83627=y
+CONFIG_MMC=y
+CONFIG_MMC_PCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_DM_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0x3f8
+CONFIG_DEBUG_UART_CLOCK=1843200
+CONFIG_SYS_NS16550=y
+CONFIG_ICH_SPI=y
+CONFIG_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_VESA=y
+CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
+CONFIG_FRAMEBUFFER_VESA_MODE_114=y
+CONFIG_CONSOLE_SCROLL_LINES=5
+CONFIG_USE_PRIVATE_LIBGCC=y
--
2.7.4
next prev parent reply other threads:[~2017-05-11 15:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-11 15:14 [U-Boot] [PATCH 0/5] Introduce secure boot for Baytrail Anatolij Gustschin
2017-05-11 15:14 ` Anatolij Gustschin [this message]
2017-05-15 3:03 ` [U-Boot] [PATCH 1/5] x86: congatec: add secureboot enabled defconfig for conga-qeval20-qa3-e3845 Simon Glass
2017-05-11 15:14 ` [U-Boot] [PATCH 2/5] x86: baytrail: Add fsp-header verification for secure boot fsp Anatolij Gustschin
2017-05-15 3:03 ` Simon Glass
2017-05-15 7:20 ` Anatolij Gustschin
2017-05-11 15:14 ` [U-Boot] [PATCH 3/5] x86: baytrail: secureboot: Add functions for verification of u-boot Anatolij Gustschin
2017-05-12 8:25 ` Lothar Waßmann
2017-05-12 8:56 ` Anatolij Gustschin
2017-05-15 3:03 ` Simon Glass
2017-05-15 7:29 ` Anatolij Gustschin
2017-05-11 15:14 ` [U-Boot] [PATCH 4/5] tools: add secure_boot_helper.py Anatolij Gustschin
2017-05-15 3:03 ` Simon Glass
2017-05-11 15:14 ` [U-Boot] [PATCH 5/5] doc: x86: Add section about secure boot on Baytrail Anatolij Gustschin
2017-05-15 3:03 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494515696-2087-2-git-send-email-agust@denx.de \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox