From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9] engicam: Move SPL mmc configs under CONFIG_SPL_BUILD
Date: Fri, 12 May 2017 17:18:21 +0530 [thread overview]
Message-ID: <1494589708-15276-3-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1494589708-15276-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
- CONFIG_SYS_FSL_USDHC_NUM
- CONFIG_SYS_FSL_ESDHC_ADDR
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
include/configs/imx6qdl_icore.h | 4 ++--
include/configs/imx6qdl_icore_rqs.h | 5 +++--
include/configs/imx6ul_geam.h | 4 ++--
include/configs/imx6ul_isiot.h | 4 ++--
4 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h
index f783eac..e4efad2 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6qdl_icore.h
@@ -139,8 +139,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* NAND */
@@ -205,6 +203,8 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
diff --git a/include/configs/imx6qdl_icore_rqs.h b/include/configs/imx6qdl_icore_rqs.h
index a639468..4bc42eb 100644
--- a/include/configs/imx6qdl_icore_rqs.h
+++ b/include/configs/imx6qdl_icore_rqs.h
@@ -121,8 +121,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* Ethernet */
@@ -139,8 +137,11 @@
/* SPL */
#ifdef CONFIG_SPL
# define CONFIG_SPL_MMC_SUPPORT
+
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h
index 9f66dd3..19b366e 100644
--- a/include/configs/imx6ul_geam.h
+++ b/include/configs/imx6ul_geam.h
@@ -138,8 +138,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* NAND */
@@ -189,6 +187,8 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
index 5ce70ae..ac89cee 100644
--- a/include/configs/imx6ul_isiot.h
+++ b/include/configs/imx6ul_isiot.h
@@ -138,8 +138,6 @@
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* NAND */
@@ -190,6 +188,8 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
--
1.9.1
next prev parent reply other threads:[~2017-05-12 11:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-12 11:48 [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 1/9] mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC Jagan Teki
2017-05-12 11:48 ` Jagan Teki [this message]
2017-05-12 11:48 ` [U-Boot] [PATCH 3/9] icorem6: Recover missing nand defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 4/9] drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 5/9] engicam: Move PHY configs to defconfig Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 6/9] icorem6: Remove unused FEC configs Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 7/9] engicam: Set console env on board_late_init Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 8/9] engicam: Add fdt_addr env value based on cpu_type Jagan Teki
2017-05-12 11:48 ` [U-Boot] [PATCH 9/9] engicam: Generate single config file Jagan Teki
2017-05-22 10:35 ` [U-Boot] [PATCH 0/9] i.MX6: Engicam: Move common config code Jagan Teki
2017-05-31 8:48 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494589708-15276-3-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox