From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 00/21] ARM: i.MX6: SabreSD: Add dts support
Date: Thu, 18 May 2017 16:30:10 +0530 [thread overview]
Message-ID: <1495105231-1723-1-git-send-email-jagan@openedev.com> (raw)
From: Jagan Teki <jagan@amarulasolutions.com>
Compared to previous series, this series
- Add dts files directly from Linux
- Moved spl code in separate file spl.c
- Add patches ontop of 'Fabio' changes.
- Droped file/drirectory rename changes
Changes for v6:
- rebase on u-boot-imx/master
- Fixed comments from 'Fabio' in v5
- Droped file/directory rename changes patches
- Droped dm_gpio changes on board
Changes for v5:
- rebase on master
- removed SPL support for i.MX6DL SabreSD
- Add board_fit_config_name_match for SPL to fetch board dts
- Add imx6qdl_sabresd_spl_defconfig for common SPL support
Changes for v4:
- rebase on master
- Rename imx6[dl|q]_sabresd_spl_defconfig to imx6[dl|q]_sabresd_spl_defconfig
- Update README
- Move CONFIG_FEC_MXC to configs/mx6[dl|q|qp]sabreauto_defconfigs
- Add dts support for non-spl based defconfigs
Changes for v3:
- rebase on master
- Added patch 'ARM: i.MX6: sabresd: Cleanup board code'
- Added patch 'ARM: i.MX6DL: sabresd: Move DCD reginit on SPL'
Changes for v2:
- rebase on master
- Added new-patches.
Jagan Teki (21):
mx6sabresd: MAINTAINERS: Remove invalid defconfigs F: list
mx6sabresd: README: Fix to add space on dd command
ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT
ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi
ARM: dts: i.MX6: Add imx6q-sabresd.dts
ARM: dts: i.MX6: Add imx6dl-sabresd.dts
ARM: dts: i.MX6: Add imx6qp.dtsi
ARM: dts: i.MX6: Add imx6qp-sabresd.dts
sabresd: i.MX6Q: Add initial dts support
sabresd: i.MX6QP: Add initial dts support
SabreSD: i.MX6DL: Add initial dts support
SabreSD: Move CONFIG_SYS_I2C_MXC to defconfigs
SabreSD: Enable DM_I2C and DM_PMIC
SabreSD: Enable CONFIG_DM_REGULATOR
SabreSD: Enable DM_USB
i.MX6: Sabre: Move CONFIG_FEC_MXC to defconfigs
i.MX6: SabreSD: Enable DM_ETH
i.MX6: sabresd: Drop checkboard
i.MX6: SabreSD: Cleanup board code
i.MX6: SabreSD: mx6sabresd_spl_defconfig => mx6sabresd_defconfig
SabreSD: README: Update with dtb changes
arch/arm/cpu/armv7/mx6/Kconfig | 18 +-
arch/arm/dts/Makefile | 3 +
arch/arm/dts/imx6dl-sabresd.dts | 17 +
arch/arm/dts/imx6q-sabresd.dts | 25 +
arch/arm/dts/imx6qdl-sabresd.dtsi | 626 ++++++++++++++
arch/arm/dts/imx6qp-sabresd.dts | 93 +++
arch/arm/dts/imx6qp.dtsi | 149 ++++
board/freescale/mx6sabresd/MAINTAINERS | 4 +-
board/freescale/mx6sabresd/Makefile | 1 +
board/freescale/mx6sabresd/README | 66 +-
board/freescale/mx6sabresd/mx6sabresd.c | 896 +++------------------
board/freescale/mx6sabresd/spl.c | 517 ++++++++++++
configs/mx6dlsabreauto_defconfig | 2 +
configs/mx6qpsabreauto_defconfig | 2 +
configs/mx6qsabreauto_defconfig | 2 +
...6sabresd_spl_defconfig => mx6sabresd_defconfig} | 7 +-
include/configs/mx6sabre_common.h | 3 +-
include/configs/mx6sabresd.h | 32 +-
18 files changed, 1586 insertions(+), 877 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
create mode 100644 arch/arm/dts/imx6q-sabresd.dts
create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
create mode 100644 arch/arm/dts/imx6qp.dtsi
create mode 100644 board/freescale/mx6sabresd/spl.c
rename configs/{mx6sabresd_spl_defconfig => mx6sabresd_defconfig} (85%)
--
1.9.1
next reply other threads:[~2017-05-18 11:00 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-18 11:00 Jagan Teki [this message]
2017-05-18 11:00 ` [U-Boot] [PATCH v6 01/21] mx6sabresd: MAINTAINERS: Remove invalid defconfigs F: list Jagan Teki
2017-05-18 12:16 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 02/21] mx6sabresd: README: Fix to add space on dd command Jagan Teki
2017-05-18 12:17 ` Fabio Estevam
2017-05-18 15:41 ` Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 03/21] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-05-18 12:18 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 04/21] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-05-18 12:20 ` Fabio Estevam
2017-05-22 16:51 ` Jagan Teki
2017-05-22 17:01 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 05/21] ARM: dts: i.MX6: Add imx6q-sabresd.dts Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 06/21] ARM: dts: i.MX6: Add imx6dl-sabresd.dts Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 07/21] ARM: dts: i.MX6: Add imx6qp.dtsi Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 08/21] ARM: dts: i.MX6: Add imx6qp-sabresd.dts Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 09/21] sabresd: i.MX6Q: Add initial dts support Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 10/21] sabresd: i.MX6QP: " Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 11/21] SabreSD: i.MX6DL: " Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 12/21] SabreSD: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 13/21] SabreSD: Enable DM_I2C and DM_PMIC Jagan Teki
2017-05-18 12:22 ` Fabio Estevam
2017-05-18 12:41 ` Fabio Estevam
2017-05-22 14:38 ` Jagan Teki
2017-05-22 14:48 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 14/21] SabreSD: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-05-18 12:23 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 15/21] SabreSD: Enable DM_USB Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 16/21] i.MX6: Sabre: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 17/21] i.MX6: SabreSD: Enable DM_ETH Jagan Teki
2017-05-18 12:26 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 18/21] i.MX6: sabresd: Drop checkboard Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 19/21] i.MX6: SabreSD: Cleanup board code Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 20/21] i.MX6: SabreSD: mx6sabresd_spl_defconfig => mx6sabresd_defconfig Jagan Teki
2017-05-18 12:27 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 21/21] SabreSD: README: Update with dtb changes Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495105231-1723-1-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox